Electronics, sensors and fuses - page 3

Introducing the Melitta Display Control Board 693 Solo E950, a precision-engineered component designed to enhance the functionality of your coffee machine. This high-quality control board ensures optimal performance and seamless operation, making it an essential replacement part for maintaining your machines efficiency. With its robust construction and reliable technology, the Melitta Display Control Board 693 Solo E950 guarantees long-lasting durability and consistent results. For easy identification and compatibility verification, refer to the supplier code: 6602024. Upgrade your coffee experience with this essential component today.'

Introducing the NTC 180mm Temperature Sensor, specifically designed for Jura, Nivona, and Siemens coffee machines. This high-precision sensor ensures optimal temperature regulation for perfect brewing results every time. With a length of 180mm, it fits seamlessly into your coffee machine setup, maintaining the ideal temperature for your favorite beverages. The sensor is crafted for durability and reliability, ensuring long-lasting performance. For easy online identification and compatibility confirmation, refer to the supplier code: 69605'. Upgrade your coffee machines performance with this essential component today.'

Compatible codes: 5213227451, PCB POWER (SW1.0.0 LW2 DG) 230V ECAM350.15.B EX:1 DeLonghi power board ECAM 350.15.B EX:1. The power board features a white label with a Cod. DeLonghi number starting with 52..., which must match one of the Cod. DeLonghi numbers listed below: 5213227451Delivery scope: 1x DeLonghi power board ECAM 350.15.B EX:1

Thermal fuse (thermal cutoff) is located on the thermoblock (heating element); if the thermoblock overheats, the fuse blows and interrupts the power supply to the heating element. Suitable for DeLonghi ECAM coffee machines.

This is the original power board (main control board), designed for DeLonghi ECAM290.21, ECAM290.31, and ECAM290.41 series coffee machines. DLS-ASSY PCB POWER+SHEET+LABEL ECAM290.
If the coffee machine does not power on, restarts by itself, or shuts down under load, replacing this spare part may help solve the problem.
A new power board restores the coffee machine’s original functionality.

Important:
Before purchasing, make sure this part is compatible with your DeLonghi coffee machine model.
Please note that the exact fault can only be determined after diagnostics at an authorized service center.

Compatible manufacturer codes:
AS00005525, AS00002585, AS00004182, 5213270652

Compatible with DeLonghi coffee machines:
ECAM290.21.B, ECAM290.22.B, ECAM290.31.SB,
ECAM290.41.TB, ECAM290.42.TB, ECAM292.33.SB

Introducing the 175°C M4 Thermostat for Steam Thermoblock Saeco Incanto, designed to ensure optimal performance and safety for your coffee machine. This high-quality thermostat is engineered to precisely regulate the temperature of the steam thermoblock, maintaining a consistent 175°C for perfect steam generation. Compatible with Saeco Incanto models, it guarantees reliable operation and longevity. For easy identification and compatibility assurance, refer to the supplier code: 996530026955. Enhance your coffee-making experience with this essential component, crafted for efficiency and durability. Ideal for both home baristas and professional settings.

"""'""""'If your BOSCH CTL636, CTL836, or SIEMENS CT636, CT836 coffee machine displays the message """"""""Fill water,"""""""" but the water tank is full, the issue is most often a malfunctioning water tank level sensor.'""""'""'"'

Bosch Iebūvējams
CTL636EB6
CTL636ES6
CTL636EB1
CTL836EC6
CTL636ES1
CTL636ES6W
BCM8450UC
CTL836EC6W

Siemens Iebūvējams
CT636LES6
CT636LEW1
CT636LES1
CT836LEB6
CT636LES6W
CT836LEB6W
CT636LES1/03

Thermal fuse (thermal cutoff) is located on the thermoblock (heating element); if the thermoblock overheats, the fuse blows and interrupts the power supply to the heating element. Suitable for Dr. Coffee coffee machines.

Compatible manufacturer codes:
9D0200010

Suitable for Dr. Coffee coffee machines:

Coffee Break
M12

Compatible codes: 5213213671, 5213213191, 5213212831, 5213212311, DeLonghi POWER BOARD Delonghi power board PCD (SW1.3 230V) ECAM 23.450. The power board features a white label with the Cod. DeLonghi number starting with 52 ..., which must match one of the Cod. DeLonghi numbers listed below: 5213213671, 5213213191, 5213212831, 5213212311. Delivery scope: 1x Delonghi power board PCD (SW1.3) 230V (DGT IFD) ECAM 23.450.

Siemens Bosch water tank level sensor. Water tank level sensor for Siemens Bosch coffee machines. If the water tank is filled with water but the screen continues to display the message or symbol: Fill water, it is most often a sign of incorrect water tank level sensor operation.

Introducing the NTC 285 Temperature Sensor, L=300 mm, specifically designed for the Barista NICR1030. This high-precision sensor ensures optimal temperature regulation for your coffee machine, enhancing performance and beverage quality. With a length of 300 mm, it offers easy installation and reliable operation. The NTC 285 is engineered for durability and accuracy, making it an essential component for maintaining your machines efficiency. Identify this product easily online using the supplier code: 6715915. Upgrade your Barista NICR1030 with this essential temperature sensor today.'

421945028963, 421945028962, 421945028961, 
421945025023, 421945025022

Introducing the Stollar Sage Transformer 230 V SEM800, SEM750 – a cutting-edge solution for your electrical needs. Engineered for efficiency and reliability, this transformer operates seamlessly at 230 volts, ensuring optimal performance for various applications. The robust design of the SEM800, SEM750 series guarantees durability and long-lasting use, making it a valuable addition to your equipment lineup. For easy identification and purchase, refer to the supplier code: SEM800/46'. This code ensures you receive the exact model tailored to meet your specific requirements. Enhance your operations with the Stollar Sage Transformer, where precision meets power.

Introducing the DeLonghi Thermostat 105 °C, a precision-engineered component designed to maintain optimal temperature control for your appliances. This high-quality thermostat ensures reliable performance and longevity, making it an essential part of your DeLonghi equipment. With a precise temperature regulation of 105 °C, it guarantees efficient operation and safety. For easy identification and compatibility verification, refer to the supplier code: 5232100600. Upgrade your appliance with the DeLonghi Thermostat 105 °C and experience enhanced performance. Ideal for those seeking dependable and consistent temperature management solutions.

Replacement part for Stollar Sage SES980 and BES980 (The Oracle) coffee machines – if steam, hot water, or coffee brewing is not functioning, the semiconductor control board (TRIAC PCB) may be faulty. Replacing this part can restore heating or brewing functionality, but the exact defect can only be determined after diagnostics at a service center.

DeLonghi NTC thermosensors L=590 mm ETAM 29, ETAM 36. The NTC thermosensors (new version in blue) are attached to the heating element (Product code: 7332196700, 5513227931, 7313232271) and transmit the measured temperature to the power board. If the coffee machine takes longer to heat than usual, this sensor is typically faulty. It is important to apply thermal paste to the heating element before placing the thermosensor. Delivery scope: 1x DeLonghi NTC thermosensor L=590 mm ETAM 29, ETAM 36 5213216071

The front milk spout sensor is an original spare part for Saeco Xelsis SM7480, SM7581, SM7583, SM7684, SM7685, SM7686, SM7785 series coffee machines.

The FTR milk sensor is located in the front milk spout assembly and detects whether the milk frother is correctly inserted.

The milk frother sensor is usually replaced if the coffee machine does not recognise the inserted milk frother or if milk drink preparation does not start after the milk frother is inserted.

If the problem persists after replacing the milk frother sensor, the cause may be the milk frother itself or the wiring connection.

If the cause of the fault is unclear, it can be checked at the ATAR service centre.

Important: To ensure compatibility, check the full model number and voltage on the appliance rating plate against the compatible model list.

Compatible manufacturer codes:
421941309911

Suitable for Saeco coffee machines:

Saeco
SM7480/00 Xelsis
SM7580/00 Xelsis
SM7581/00 Xelsis
SM7581/04 Xelsis
SM7583/00 Xelsis
SM7680/00 Xelsis
SM7683/00 Xelsis
SM7683/07 Xelsis
SM7683/10 Xelsis
SM7684/00 Xelsis
SM7684/04 Xelsis
SM7685/00 Xelsis
SM7685/04 Xelsis
SM7685/07 Xelsis
SM7686/00 Xelsis
SM7785/00 Xelsis
SM7786/00 Xelsis

Introducing the high-performance Transformer 230 V, designed specifically for Melitta, Jura, and Nivona coffee machines. This reliable transformer ensures optimal power conversion, enhancing the efficiency and longevity of your coffee maker. Engineered for precision, it seamlessly integrates with your appliance, guaranteeing consistent performance. The Transformer 230 V is crafted with durable materials to withstand daily use, making it an essential component for coffee enthusiasts. For easy identification and compatibility assurance, refer to the supplier code (66286'). Upgrade your coffee experience with this essential transformer and enjoy perfect brews every time.

Temperature sensor, NTC sensor suitable as a spare part for Saeco, Philips coffee machines. If the coffee comes out cold or the machine takes too long to heat, the cause may be a faulty sensor. Replacing the spare part is a possible solution; precise defect determination will be made by diagnostics at the service center. Compatible codes: 421946046921, 421945058801 Suitable for Saeco, Philips coffee machines. Saeco Saeco GranAroma, Xelsis SM8 Philips 800 Series, Philips 1200 Series Philips LatteGo 2200 Series, Philips LatteGo 2300 Series Philips LatteGo 3200 Series, Philips LatteGo 3300 Series Philips LatteGo 4300 and 5400 Series

FUSE + WIRES FOR STEAM BOILER BES900, BES920, BES980

Thermal fuse (thermal cutoff) is located on the thermoblock (heating element); if the thermoblock overheats, the fuse blows and interrupts the power supply to the heating element. Suitable for DeLonghi ECAM coffee machines.

"""'""""'Water Tank Level Sensor (V3), water tank sensor, Saeco sensor, 3-contact water level sensor, Spare part for Saeco, Philips, Gaggia coffee machines. If the water tank is filled with water but the screen continues to display the message or symbol """"""""Fill Water,"""""""" these are most often signs of incorrect water tank level sensor operation. Compatible codes: 421941306721, 421945046081996530001522 (11003232), 996530000425 (11000651) CPU+SW WATER LEVEL SENSOR V3 ASSY Suitable for Saeco, Philips, Gaggia coffee machines.'""""'""'"'

Introducing the DeLonghi Thermosensor 318°C ECAM|ETAM, a precision-engineered component designed to enhance the performance of your coffee machine. This thermosensor ensures optimal temperature regulation up to 318°C, providing consistent and precise heat management for superior coffee extraction. Ideal for both ECAM and ETAM series, it guarantees seamless compatibility and reliable functionality. For easy identification and purchase, refer to the supplier code: 5213216261. Upgrade your coffee experience with this essential DeLonghi thermosensor, crafted for durability and efficiency.

Saeco Xsmall HD8743/03, HD8743/11, HD8743/12, HD8743/13, HD8743/15, HD8743/16, HD8743/17, HD8743/19, HD8743/31, HD8745, SUP033R, HD8745/01, HD8745/03, HD8745/09, HD8745/11, HD8745/19, HD8745/21, HD8745/23, HD8747/01, HD8747/02, HD8747/03, HD8747/09