Meat grinders

The food pusher is an original spare part for Stollar BMG590, BMG720 and BMG800 meat grinders.

Meat and other food are placed in the meat grinder feed opening and pushed towards the grinding mechanism using the meat pusher.

The meat grinder pusher is usually replaced if:

• it is cracked, broken or otherwise damaged;
• the pusher gets stuck in the feed opening due to deformation;
• it has been lost.

Use the food pusher to feed meat and other food into the grinder. To avoid injury, push food through the feed opening only with the pusher, never with your fingers.

Important: Before purchasing, please check that your Stollar meat grinder model is included in the list of compatible models and compare the pusher with the product photo.

Compatible manufacturer part numbers:
BMG800/1-7

Suitable for Stollar meat grinders:
BMG590
BMG720
BMG800

The feed screw shaft of the Stollar BMG915, BMG910, BMG900, BMG750, BMG570 (for new models) meat grinders guides meat directly to the blade area, maintaining a smooth and consistent flow during grinding. If, while the motor is running, meat starts to accumulate at the beginning of the thread, the most likely cause is a worn or deformed auger screw.

In many cases, replacing the auger helps eliminate feed interruptions and correct the described symptoms by removing the root cause of the fault.

Important note: The meat grinder auger screw has a hex end. If your previous auger had a square end, you will also need to order the corresponding meat grinder gear (product code: BMG570/40).

Important: Ensure that the malfunction is directly related to the meat grinder screw. This spare part can be replaced at home without the need to fully disassemble the meat grinder.

Compatible Manufacturer Codes
BBMG915/04, BMG910/04, 
BMG750/04, BMG900/04
BMG570/04

Compatible with Stollar Meat Grinders
BMG915
BMG910
BMG900
BMG750
BMG570

The rotary coarse slices blade is an original Stollar spare part designed for consistent slicing and cutting of vegetables, cheese, fruits and other food products.
This replaceable drum coarse blade is one of the meat mincer accessories (item codes: BMG570/38, BMG750/47, BMG570/48) and is mounted directly onto the main body.
When the rotary coarse slices drum becomes worn or mechanically damaged, replacing it helps eliminate the described symptoms and restores the slicing and cutting quality.
Replacement of the rotary coarse slices blade can be performed without the assistance of a service centre.

Important: Before purchase, please check the compatibility of the part with your Stollar meat mincer model.

Compatible manufacturer codes
BMG570/49, BMG750/49, BMG900/49

Compatible with Stollar meat mincers:
BMG570, BMG750, BMG900

Stollar the Power Grind meat grinder BMG590, BMG600, BMG720, BMG800 Stollar BIMETAL BUSHES

In Stollar BMG450 and BMG470 meat mincers, the auger moves meat towards the blade during grinding. When meat remains at the start of the thread and does not move forward, the most common cause is a worn feed screw.

In many cases, wear of the auger affects how meat moves through the grinding chamber during operation.

Important: Before purchasing this spare part, visually check whether the issue is related to the auger, as similar symptoms can be caused by other meat grinder components. Replacement is usually possible at home without fully disassembling the appliance.

Compatible manufacturer codes:
BMG450/1-5, BMG470/1-5

Compatible with Stollar Meat Grinders:
BMG450
BMG470

If the meat grinder's grinding chamber (meat grinder feeding tube) is broken, cracked or deformed, it can no longer be used safely. Replace the damaged part with an original Stollar spare part. Meat Grinder Screw Body.

Replacement is easy and can be done at home.

Compatible manufacturer codes:
BMG450/1-9

Suitable for Stollat ​​​​meat grinder:
BMG450

Meat grinder spare part, gearbox gear Stollar BMG720 ensures proper motion transmission between the worm shaft and the motor. If the meat grinder operates intermittently, makes a cracking noise, or the blades no longer rotate smoothly, the gear may be worn or damaged. Replacement of the spare part is offered as a possible solution, with the exact damage determined only after service diagnostics. Compatible codes: BMG720/1-7-2 Suitable for Stollar meat grinders: BMG720

The grinder auger Stollar BMG740 guides meat directly toward the blade and ensures a steady feed flow during grinding. If the motor runs but the screw does not rotate, the cause is usually a worn or deformed drive screw for meat mincer (BMG740/10).
Replacing the meat grinder screw often eliminates feed interruptions and restores normal operation by removing the source of the fault.
Important: make sure that the malfunction is directly related to the meat grinder auger. The spare part can be replaced at home without completely disassembling the meat grinder.

Compatible Manufacturer Codes
BMG740/10

Compatible with Stollar Meat Grinder
BMG740

Drive gear Stollar BMG820 for the mincer connects the motor shaft to the auger and transmits torque to the screw.
If the motor runs but the auger does not rotate, the reason is usually a broken or worn gear.
The damage occurs due to prolonged load or the entry of foreign objects, bones, or tendons.
Service experience shows that the described symptoms disappear after replacing the damaged gear.
Important: make sure that the malfunction is directly related to the mincer gear. The replacement can be carried out at home without completely disassembling the mincer.

Compatible manufacturer codes
BMG820/X4

Suitable for Stollar mincer
BMG820

BMG800/16-17, BMG600/42, BMG450/12

This meat grinder blade is compatible with Stollar BMG550, BMG590, BMG600, BMG720, BMG800, BMG820 and BMG850 models.
If the meat is ground unevenly or the mechanism slows down, the blade may be dull or damaged.
Replacing the blade may improve grinding quality and eliminate mechanical issues.
Blade replacement is offered as a possible solution.

Compatible codes:
BMG600/25, BMG800/1-17, BMG820/X8

Compatible models:
BMG550, BMG590, BMG600, BMG720
BMG800, BMG820, BMG850

Meat mincer chopper housing (rotating food chopper) ensures proper chopping of ingredients for Stollar BMG570, BMG750 and BMG900 meat mincers.

A damaged part usually causes uneven mincing or jamming during operation. Replacement helps restore the mincing process and prevent food blockage.

Compatible rotating grating and chopping drums are also available in our store (product codes: BMG750/47, BMG750/48, BMG750/49).

Replacement can be done at home without special tools if the chopper is worn or mechanically damaged.

Important: Before purchasing, make sure this spare part is compatible with your Stollar BMG meat mincer model.

Compatible manufacturer codes:

• BMG570/38

• BMG750/38

• BMG900/38

Suitable for Stollar models:

• BMG570

• BMG750

• BMG900

BMG450, BMG720 GEAR

If the grinding compartment (main tube) is broken, cracked, or snapped, it can no longer be used safely. Replace the damaged part with an original Stollar spare part designed for the BMG570 model.

The feed screw shaft of the Stollar BMG590, BMG600, BMG720, BMG800 and BMG820 meat grinders guides meat directly to the blade area and maintains a smooth flow during grinding. If, while the motor is running, meat starts to accumulate at the beginning of the thread, the most likely cause is a worn or deformed auger screw (BMG800/1-16)

In many cases, replacing the auger helps eliminate feed interruptions and correct the described symptoms by removing the root cause of the fault.

Important: Ensure that the malfunction is directly related to the meat grinder auger. This spare part can be replaced at home without the need to fully disassemble the meat grinder.

Compatible Manufacturer Codes
BMG600/26, BMG800/1-16, BMG820/X7

Compatible with Stollar Meat Grinders
BMG590, BMG600
BMG720, BMG800,
BMG820

The meat grinder chamber is the core component of Stollar BMG900, BMG910 mincers, where the feed shaft, blade, and disc are mounted. It forms the channel through which ingredients are directed to the blade for grinding.

If the meat grinder housing is cracked or the mounting area is worn, the feed shaft may become loose, causing leakage or rattling noises during grinding. These issues often arise from prolonged use or mechanical impact.

Replacing the meat grinder head assembly eliminates these symptoms by resolving the root cause.

Important: Make sure the fault is related to the feed tube. The part can typically be replaced at home without fully dismantling the mincer.

Compatible Manufacturer Codes
BMG900/08
BMG910/08

Compatible with Stollar meat mincers
BMG900
BMG910

The locking ring for Stollar BMG720, BMG800 meat grinders is a spare part that ensures a stable connection of the mechanism, preventing movement and wear of parts. Suitable for BMG720 and BMG800 models, guaranteeing safe and efficient operation.

The rotary grating drum for fine shredding is an original Stollar spare part, designed for consistent grating of vegetables, cheese, fruit, and other food products.
This interchangeable cylinder is part of the meat mincer’s accessory set (part code: BMG570/38) and attaches directly to the machine body.
When the grating drum becomes worn or mechanically damaged, replacing it helps eliminate the described issues and restores the quality of food shredding.
The rotary grater replacement for fine shredding is simple and can be performed at home.

Important: Before purchasing, check the compatibility of the part with your Stollar meat mincer model.

Compatible manufacturer codes
BMG570/47

Compatible with Stollar meat mincers:
BMG570, BMG750, BMG900

Introducing the Gear Wheel Holder Stollar BMG720, an essential component for your meat grinder. Designed for precision and durability, this gear wheel holder ensures smooth operation and optimal performance. Compatible with various models, it is crafted from high-quality materials to withstand rigorous use. The supplier code BMG720/01-2 allows for easy identification and compatibility verification online. Upgrade your meat grinder with the reliable Gear Wheel Holder Stollar BMG720 and experience seamless grinding every time. Perfect for both professional and home kitchens.

The auger washers and gasket form a replacement parts set for the Stollar BMG570 meat mincer. In this meat grinder, the parts are located at the end of the meat mincer screw, separate the adjoining components, reduce friction and protect the gearbox from meat juices entering it.

The washer and gasket set is usually replaced if vibration, noise or fluid leakage occurs at the end of the auger during grinding. In our service experience, these symptoms are often associated with worn seals or washers, which can increase the load on the gearbox.

Important: Before purchasing, check the model number of your Stollar BMG570 meat mincer against the list of compatible models.

Compatible manufacturer codes:
BMG570/5
BMG570/6
BMG570/7

Suitable for Stollar meat mincers:
BMG570

The gear of the Stollar BMG420 and BMG430 meat grinder ensures the transfer of engine power to the grinding mechanism. Over time, it may wear out or become damaged, causing noise, reduced performance, or device malfunction. If you observe such symptoms, a gear replacement may be necessary.

The grinding compartment (main tube) is broken, cracked, or snapped, and can no longer be used safely. Replace the damaged part with an original Stollar spare part suitable for models BMG550, BMG590, BMG600, BMG720, BMG800, and BMG850.

Replace the medium meat grinder plate on your Stollar BMG570, BMG750, BMG900 or BMG750/02B meat grinder if it is worn, deformed or mechanically damaged.
If minced meat becomes too coarse, remains unground or loses its uniform texture, this usually indicates wear or damage to the grinding plate.

Replacing this Stollar spare part is a simple way to fix these issues and restore the consistency of minced meat.
The medium plate replacement can be easily carried out at home.

Important: Before purchasing, check compatibility with your Stollar meat grinder model.

Compatible Manufacturer Codes
BMG750/02B, BMG570/02B

Compatible with Stollar Meat Grinders
BMG570, BMG750, BMG900

main tube

The Stollar BMG420 and BMG430 meat grinder gearbox gear ensures the transfer of engine power to the grinding mechanism. Over time, it may wear out or become damaged, causing noise, reduced performance, or device malfunction.

If the meat grinder's grinding chamber (meat grinder feeding tube) is broken, cracked or deformed, it can no longer be used safely. Replace the damaged part with an original Stollar spare part. Meat Grinder Screw Body.

Replacement is easy and can be done at home.

Compatible manufacturer codes:
BMG420/08, BMG430/08

Suitable for Stollat ​​​​meat grinder:
BMG420, BMG430

The meat grinder blade is a spare part for Stollar BMG420, BMG425, and BMG430 models. It is designed to replace a worn or damaged cutting edge that can no longer grind meat effectively.

If grinding becomes uneven, meat remains unprocessed, or the mechanism runs without resistance, blade replacement is usually necessary.

Replacing the blade restores proper grinding performance. The part can be replaced at home – no special tools are required.
Compatible Manufacturer Codes:
BMG430/03

Suitable for Stollar Models:
BMG420, BMG425, BMG430