Blenders
Blender spare part, Sage blender jug base with blades, blender base with blades, blender blade for Sage SNB550, SNB600 blender. If the blender grinds unevenly, makes unusual noises, or the base blade mechanism spins freely, the base may be damaged or worn. Compatible codes: SNB550/37-49, SNB600/25-37 Suitable for Stollar blender: Stollar SNB550, SNB600
The whisk attachment gearbox connects the whisk shaft to the motor and enables rotation. Compatible with the Stollar SHB600, SHB610, SHB700, SHB720 hand blender, code SHB700/F.
Replacement is recommended if the whisk no longer rotates, falls out, or there is visible mechanical damage.
The gearbox is removable and acts as a whisk holder, also referred to as a detachable whisk reducer.
Compatible Manufacturer Codes
SHB600/F, SHB610/F, SHB700/F, SHB700/F
Fits Stollar Models
SHB600, SHB610, SHB700, SHB720
The blender jug gasket is a replacement part for Stollar / Sage SNB550 and SNB600 models.
If liquid is visible leaking from the base of the jug or collecting underneath, the gasket may have lost elasticity.
Replacing the gasket may help restore a tight seal and prevent further leakage.
Compatible code:
SNB600/04
Fits models:
SNB550
SNB600
The on/off button assembly with safety microswitch and wires is a genuine spare part for Stollar SNB550 ActiveLife, SNB550S ActiveLife Sky Blue blenders.
The switch assembly is located inside the blender motor base. The power switch turns the blender on and off, while the safety microswitch allows the motor to run only if the jar with the blade unit is correctly fitted.
The switch assembly with safety microswitch is usually replaced if:
• the blender does not turn on when the power button is pressed;
• the blender cannot be turned off with the on/off button;
• the blender does not turn on even if the jar with the blade unit is correctly fitted;
• the on/off switch or safety microswitch is mechanically damaged.
If the blender does not turn on, first check that the jar with the blade unit is correctly fitted to the motor base. If the jar is not fitted correctly, the safety switch prevents the motor from starting.
Important: Before purchasing, check that your Stollar blender model is included in the list of compatible models and compare the part to be replaced with the product photo.
Compatible manufacturer part numbers:
SNB550/15
Suitable for Stollar blenders:
SNB550 ActiveLife
SNB550S ActiveLife Sky Blue
The mounting base is a spare part that connects the motor unit and accessories of Stollar SHB600, SHB610, SHB700, and SHB720 hand blenders. This fixing base ensures a secure fit between the motor block and working tools such as the whisk or chopper mechanisms.
Damage most often appears as cracks in the plastic, looseness, or unstable connection. Replacement is an effective step that usually helps restore the connection between the motor unit and accessories.
Other Stollar hand-blender spare parts, including jugs, attachments, and whisk mechanisms, are also available in our shop (compatible codes: SHB700/D, SHB700/F, SHB700/K, SHB600/E).
Important: Before purchase, make sure this mounting base is compatible with your Stollar SHB hand-blender model.
Compatible Manufacturer Codes
SHB720/20
SHB700/20
SHB610/20
SHB600/20
Compatible with Stollar Hand Blenders
SHB600
SHB610
SHB700
SHB720
This is the original replacement part designed for the Stollar SHB600, SHB610, SHB700, SHB720 hand blender. The whisk attaches to the removable gear mechanism and is used for whipping milk or other liquids.
Replacement is recommended if the whisk is bent, broken, or shows visible signs of wear.
Tool-free installation – the whisk attaches directly to the blender's gearbox.
Compatible Manufacturer Codes
SHB700/G
Compatible with Stollar models
SHB600, SHB610, SHB700, SHB720
To ensure compatibility, compare the model code with the label on your hand blender body or its packaging.
Stollar SHB700 hand blender spare part – if the chopper bowl does not close tightly, the lid is damaged or deformed and does not ensure a mechanical connection with the motor block, it may disrupt blade operation or ingredient chopping. Replacement of the spare part is offered as a possible solution.
Introducing the Stollar Gearbox Gear SNB550, SNB600, a premium component designed for optimal performance and durability in your machinery. Engineered to meet the highest standards, this gearbox gear ensures seamless operation and longevity. The product is identified by the supplier code SNB550/36, making it easy to find and order online. Ideal for both SNB550 and SNB600 models, this gear is crafted with precision to enhance the efficiency and reliability of your equipment. Upgrade your machinery with the Stollar Gearbox Gear and experience superior functionality.
The Stollar blender shaft is one of the most crucial components for hand blenders (SHB600, SHB610, SHB700, SHB720) as it is in direct contact with the processed products and determines the devices efficiency. Spare parts, such as the blender shaft, are necessary to ensure the longevity and optimal performance of the blender. The Hand Blender Stollar SHB600, SHB610, SHB700, SHB720.'
This original Stollar STB700 part features a silicone-sealed blender jug lid cover designed for a secure fit on Stollar blenders. It closes the container tightly and helps prevent splashing during blending.
If the Stollar blender lid is cracked, deformed or mechanically damaged, it should be replaced. The removable centre cap allows ingredients to be added without stopping the blending process. The replacement can be carried out at home without special tools.
Important: before purchasing, make sure that the spare part matches your blender model by comparing the number indicated on the appliance body with the compatible list. This replacement blender lid is designed for the Stollar STB700 series.
Compatible Manufacturer Codes:
STB700/01-02, STB700/01, STB700/02
Suitable for Stollar Blenders:
STB700
Blender spare part, blender container, blending container, Stollar blender. If the blending container is broken, cracked, or leaking, it can no longer be used safely. Replace the damaged container with an original Stollar spare part designed for the SNB550 blender. Compatible codes: SNB550/51 Suitable for Stollar hand blender: SNB550
Blender spare part, 1500ml jug with blades for Stollar BBL405 models. Restores the chopping and blending functions of ingredients when the original jug is damaged or the blades are worn out. Replacement is one of the possible solutions to restore full blender functionality. Compatible codes: BBL405/06 Suitable for Stollar kitchen processors: BBL405
The Stollar STB700 blender glass container serves as a jug for placing ingredients.
The glass blender jug should be replaced if it is cracked, chipped, or if persistent deposits have formed on the glass surface that can no longer be washed off. Such damage can cause leakage or make the Stollar blender glass container unsuitable for food preparation. The glass jug can be washed in the dishwasher by simply removing the blade part.
Important: Before purchasing, make sure that the spare part – the glass jug – matches your STB700 model by comparing the marking on the body with the compatible list.
Compatible manufacturer codes:
STB700/03-10
Suitable for Stollar blenders:
STB700
This is the original spare part – motor body (motor housing), designed for Stollar SHB700 and SHB720 hand blenders.
If the blender no longer switches on, the motor runs unevenly or completely stops, replacement often helps solve the problem and restore the blender’s functionality.
Replacing the motor body is simple and can be carried out at home.
Please note that the exact cause of malfunction can only be confirmed after a full diagnosis at the ATAR service centre.
Compatible manufacturer codes
SHB720/D
Compatible with Stollar hand blenders
SHB700, SHB720
Stollar and Sage blender spare part for STB550 and STB570 – if the glass jug does not secure or leaks liquid from the bottom, the base may be damaged or worn out. Replacing the spare part is offered as a possible solution.
the Blend & Crush blender Stollar STB550, STB570
The Original Drive Coupling (motor connector) is a spare part that ensures the transfer of motor power to the blender jug blades.
If your blender switches on but the blades do not spin, or if you hear a loud grinding noise without a blending effect, this typically indicates damage to the coupling or its gears.
Replacing this spare part most often helps to restore the blender's function.
Important: Before purchasing, please ensure the coupling matches your blender model.
The exact defect can only be determined after diagnostics at the ATAR service centre.
Compatible manufacturer codes:
BBL605/27, SP0000474
Suitable for Stollar, Breville blenders:
Stollar BBL605, Breville BBL605
The blender base with blades is a replacement part designed to ensure proper blending and ingredient chopping.
If the blades are worn out, the mechanism turns with difficulty, or the base seal is damaged, replacement may help eliminate the issue and restore the full functionality of the blender.
Compatible codes:
SP0008978, BPB550/10, BPB620BAL/10
Fits Sage and Breville blenders:
BPB550, BPB600, BPB610
BPB620, BPB625
Spare part for blender, lid for glass blender jug, lid for glass blender jug is supplied without a gasket, which can be ordered separately (item code: SBL920/03, SP0025003). The lid should be replaced if it is cracked, deformed, poorly fitting, or no longer provides a seal. Compatible codes: SP0025002, SBL920/02. Suitable for the following Sage, Breville blenders: Sage SBL820, SBL920 Breville BBL820, BBL920.
Replacement jug with blade assembly for Sage SBL820 and SBL920 blenders. If your blender starts working more slowly or no longer blends ingredients evenly, replacing the jug may help restore normal blending performance. This 2 litre jug supports smooth and efficient ingredient processing.
Compatible manufacturer codes
SP0025004, SBL920/04
Suitable for the following Sage, Breville blenders:
Sage
SBL820, SBL920
Breville
BBL820, BBL920
Stollar Blend&Grind STB550, STB570
This is a genuine blender lid with a ring pull and silicone seal, designed for Sage and Breville blenders. It provides a secure seal to prevent leaks and splashes during blending. The removable central cap allows for easy addition of ingredients while the blender is in operation.
If your blender lid is damaged or lost, replace it to continue using your appliance safely and effectively. Replacement is simple and can be done at home.
Compatible manufacturer codes SP0016078
Suitable for Sage and Breville blenders
Breville: BBL500, BBL550, BBL560, BBL600,
BBL605, BBL620, BJB840
Sage: SBL620
Important: To ensure this is the correct lid for your blender, compare your blender's model number, found on the sticker on the appliance's body, with the list of compatible models above.
Description
This is the original lid with a hinged top (TO-GO cup lid) for the Stollar SNB550 blender, designed to provide a hermetic seal and prevent leaks, allowing you to safely take your drink with you.
If the lid is damaged or no longer closes hermetically, replacing it ensures maximum sealing.
Replacement is simple and can be performed at home.
Important: Before purchasing, make sure this part is compatible with your Stollar SNB550 blender model.
Compatible manufacturer codes
SNB550/50-57
Suitable for Stollar blender
SNB550
The Stollar blender chopping container with base (model SHB700) is an essential accessory that ensures efficient chopping and mixing of products. The container helps maintain freshness and prevents ingredient splatter, while the base provides stability and ease of use during the blending process.
