0.24 mm air intake nozzle for Melitta and Nivona coffee machines (6758803)

The 0.24 mm air intake nozzle for the ceramic valve is a genuine spare part for Melitta Caffeo Passione OT and Varianza CSP coffee machines.

The air intake nozzle is located on the coffee machine's ceramic valve. The air required for milk frothing is drawn in through it.

The air intake nozzle on the ceramic valve is usually replaced if:
• only hot milk is dispensed instead of milk foam;
• milk frothing has deteriorated significantly and does not improve after thorough cleaning of the milk system.

Before replacing the nozzle, thoroughly clean the milk tube and the removable milk frother parts located in the coffee spout. After cleaning, reassemble the frother and check that all parts are correctly fitted and connected.

If milk frothing does not improve after cleaning, check whether the coffee machine needs descaling. Descale the coffee machine according to the instructions for your model, as limescale deposits can interfere with milk frothing.

Do not confuse this 0.24 mm nozzle with the 0.22 mm version (6760015). Before purchasing, check the code and version of the nozzle you are replacing.

If the cause of the fault is unclear, the ATAR service centre can help identify it.

Important: before purchasing, check that your Melitta or Nivona coffee machine model is included in the list of compatible models, and compare the air intake nozzle you are replacing with the product photograph.

Compatible manufacturer codes:
6758803

Suitable for Melitta coffee machines:
Caffeo Passione OT F53/1-101
Caffeo Passione OT F53/1-102
Caffeo Varianza CSP F57/0-102
Caffeo Varianza CSP SST F58/0-100