Household equipments catalog

This meat grinder blade is compatible with Stollar BMG550, BMG590, BMG600, BMG720, BMG800, BMG820 and BMG850 models.
If the meat is ground unevenly or the mechanism slows down, the blade may be dull or damaged.
Replacing the blade may improve grinding quality and eliminate mechanical issues.
Blade replacement is offered as a possible solution.

Compatible codes:
BMG600/25, BMG800/1-17, BMG820/X8

Compatible models:
BMG550, BMG590, BMG600, BMG720
BMG800, BMG820, BMG850

Blender spare part, Stollar base for blender jug, jug base for blender, blender jug base, its wear or damage can significantly affect blender performance. This spare part is responsible for jug stability and often contains the blender blade mechanism, ensuring efficient mixing.

Compatible manufacturer codes:
SPP600/22, SPP700/22, SPP800/22.

Suitable for the following Stollar blenders:
SPP600, SPP700, SPP800.

This is the original juicing screw (extraction mechanism), designed for the Stollar BJP700 juicer.
If the screw is damaged, worn out, or juice yield decreases, replacing this part often solves the problem.
Replacement is simple and can be carried out at home.

Important: Before purchasing, make sure this part is compatible with your Stollar juicer model.
Remember that the exact defect can only be confirmed after diagnostics at a service center.

Compatible manufacturer codes
BJP750/48

Suitable for Stollar juicers
BJP700

The auger shaft washers and gasket form a replacement parts set for Stollar BMG750, BMG900 and BMG910 meat mincers. The same models may also be searched for as meat grinders. The parts in the set are located at the end of the auger, separate the adjoining components, reduce friction and protect the gearbox from meat juices entering it.

The washer set is usually replaced if vibration, noise or fluid leakage occurs at the end of the auger shaft during grinding. In our service experience, these symptoms are often associated with worn seals or washers, which can increase the load on the gearbox.

Important: Before purchasing, check the model number of your Stollar BMG meat mincer against the list of compatible models.

Compatible manufacturer codes:
BMG750/05
BMG750/06
BMG750/07
BMG750/15
BMG900/05
BMG900/06
BMG900/07
BMG900/15
BMG910/05
BMG910/06
BMG910/07
BMG910/15

Suitable for Stollar meat mincers:
BMG750
BMG900
BMG910

The meat grinder blade is a spare part for Stollar BMG420, BMG425, and BMG430 models. It is designed to replace a worn or damaged cutting edge that can no longer grind meat effectively.

If grinding becomes uneven, meat remains unprocessed, or the mechanism runs without resistance, blade replacement is usually necessary.

Replacing the blade restores proper grinding performance. The part can be replaced at home – no special tools are required.
Compatible Manufacturer Codes:
BMG430/03

Suitable for Stollar Models:
BMG420, BMG425, BMG430

The Stollar mixing bowl lid SPP600 and SPP700 ensures safety, efficient mixing, and order in the kitchen. It protects ingredients from splattering, maintains freshness, and safeguards the device from damage.

The rotary coarse slices blade is an original Stollar spare part designed for consistent slicing and cutting of vegetables, cheese, fruits and other food products.
This replaceable drum coarse blade is one of the meat mincer accessories (item codes: BMG570/38, BMG750/47, BMG570/48) and is mounted directly onto the main body.
When the rotary coarse slices drum becomes worn or mechanically damaged, replacing it helps eliminate the described symptoms and restores the slicing and cutting quality.
Replacement of the rotary coarse slices blade can be performed without the assistance of a service centre.

Important: Before purchase, please check the compatibility of the part with your Stollar meat mincer model.

Compatible manufacturer codes
BMG570/49, BMG750/49, BMG900/49

Compatible with Stollar meat mincers:
BMG570, BMG750, BMG900

Compatible with: Stollar the Multi Food Processor kitchen appliance Stollar SPP700

The whisk attachment gearbox connects the whisk shaft to the motor and enables rotation. Compatible with the Stollar SHB600, SHB610, SHB700, SHB720 hand blender, code SHB700/F.
Replacement is recommended if the whisk no longer rotates, falls out, or there is visible mechanical damage.
The gearbox is removable and acts as a whisk holder, also referred to as a detachable whisk reducer.

Compatible Manufacturer Codes
SHB600/F, SHB610/F, SHB700/F, SHB700/F

Fits Stollar Models
SHB600, SHB610, SHB700, SHB720

The Stollar STB700 blender glass container serves as a jug for placing ingredients.

The glass blender jug should be replaced if it is cracked, chipped, or if persistent deposits have formed on the glass surface that can no longer be washed off. Such damage can cause leakage or make the Stollar blender glass container unsuitable for food preparation. The glass jug can be washed in the dishwasher by simply removing the blade part.

Important: Before purchasing, make sure that the spare part – the glass jug – matches your STB700 model by comparing the marking on the body with the compatible list.

Compatible manufacturer codes:
STB700/03-10

Suitable for Stollar blenders:
STB700

The food pusher is an original spare part for Stollar BMG590, BMG720 and BMG800 meat grinders.

Meat and other food are placed in the meat grinder feed opening and pushed towards the grinding mechanism using the meat pusher.

The meat grinder pusher is usually replaced if:

• it is cracked, broken or otherwise damaged;
• the pusher gets stuck in the feed opening due to deformation;
• it has been lost.

Use the food pusher to feed meat and other food into the grinder. To avoid injury, push food through the feed opening only with the pusher, never with your fingers.

Important: Before purchasing, please check that your Stollar meat grinder model is included in the list of compatible models and compare the pusher with the product photo.

Compatible manufacturer part numbers:
BMG800/1-7

Suitable for Stollar meat grinders:
BMG590
BMG720
BMG800

The Stollar mixing bowl lid SPP600 and SPP700 ensures safety, efficient mixing, and order in the kitchen. It protects ingredients from splattering, maintains freshness, and safeguards the device from damage.

main tube

SP0008688, SJE830/17, BJE830/17 the Nutri Juicer™ Cold XL Sage BSE430, SJE830, BJE830, juice extractor, 2-liter juice jug (dishwasher safe).

The Stollar BMG420 and BMG430 meat grinder gearbox gear ensures the transfer of engine power to the grinding mechanism. Over time, it may wear out or become damaged, causing noise, reduced performance, or device malfunction.

Virtuves kombaina rezerves daļa, divpusējs rupjas šķēlēšanas un rīvēšanas disks Stollar SPP700 virtuves kombainam.
Saderigie kodi : SPP700/11, SPP700/11 – SS DISC B/1
Piemērots Stollar virtuves kombainiem:
SPP700

The auger shaft washer and gasket are a replacement parts set for Stollar BMG590, BMG600, BMG720 and BMG800 meat mincers. The parts in the set are located at the end of the auger shaft, separate the connecting elements, reduce friction and protect the motor unit from meat juices entering.

The washer and gasket set is usually replaced if vibration, noise or liquid leakage appears around the auger shaft during grinding. In our service experience, these symptoms are often linked to worn seals or washers, which can increase the load on the gearbox.

Important: Before purchasing, compare the model number of your Stollar BMG meat mincer with the compatible models list.

Compatible manufacturer codes:
BMG800/1-10
BMG800/1-11
BMG800/1-14
BMG800/1-16-2

Suitable for Stollar meat mincers:
BMG590
BMG600
BMG720
BMG800

The Stollar Sage glass blender jug gasket is located between the blender jug blades and the blender base.

Meat grinder spare part, Stollar BMG420 and BMG430 meat grinder gearbox gear, ensures the transfer of engine power to the grinding mechanism. Over time, it may wear out or become damaged, causing noise, reduced performance, or device malfunction. If you notice such symptoms, a gearbox gear replacement may be necessary. Compatible codes: BMG430/29 Suitable for Stollar meat grinders: BMG420, BMG430

Milk frother replacement part for Sage SMF600 model – if the milk foam layer in latte mode becomes too thick or the foam does not form evenly, it may be due to a worn or damaged latte frothing disk. Replacing this part can help restore proper milk texture and consistent frothing. Compatible manufacturer codes: SP0002499, SMF600/18 Suitable for the following Sage, Breville milk frother: Sage SMF600, Breville BMF600

Meat grinder blade compatible with Stollar BMG450 and BMG470 models. Designed to replace a worn or damaged cutting element that can no longer grind meat effectively.

If the grinding becomes uneven, meat remains unprocessed, or the mechanism runs idle, blade replacement is likely required. Restores full grinding function. Can be replaced at home – no special tools needed.

Compatible Manufacturer Codes:
BMG450/1-4

Fits Stollar Models:
BMG450, BMG470

the Blend & Crush blender Stollar STB550, STB570

The mounting base is a spare part that connects the motor unit and accessories of Stollar SHB600, SHB610, SHB700, and SHB720 hand blenders. This fixing base ensures a secure fit between the motor block and working tools such as the whisk or chopper mechanisms.

Damage most often appears as cracks in the plastic, looseness, or unstable connection. Replacement is an effective step that usually helps restore the connection between the motor unit and accessories.

Other Stollar hand-blender spare parts, including jugs, attachments, and whisk mechanisms, are also available in our shop (compatible codes: SHB700/D, SHB700/F, SHB700/K, SHB600/E).

Important: Before purchase, make sure this mounting base is compatible with your Stollar SHB hand-blender model.

Compatible Manufacturer Codes
SHB720/20
SHB700/20
SHB610/20
SHB600/20

Compatible with Stollar Hand Blenders
SHB600
SHB610
SHB700
SHB720

Blender spare part, Sage blender jug base with blades, blender base with blades, blender blade for Sage SNB550, SNB600 blender. If the blender grinds unevenly, makes unusual noises, or the base blade mechanism spins freely, the base may be damaged or worn. Compatible codes: SNB550/37-49, SNB600/25-37 Suitable for Stollar blender: Stollar SNB550, SNB600

The grinder auger Stollar BMG740 guides meat directly toward the blade and ensures a steady feed flow during grinding. If the motor runs but the screw does not rotate, the cause is usually a worn or deformed drive screw for meat mincer (BMG740/10).
Replacing the meat grinder screw often eliminates feed interruptions and restores normal operation by removing the source of the fault.
Important: make sure that the malfunction is directly related to the meat grinder auger. The spare part can be replaced at home without completely disassembling the meat grinder.

Compatible Manufacturer Codes
BMG740/10

Compatible with Stollar Meat Grinder
BMG740

This is the original replacement part designed for the Stollar SHB600, SHB610, SHB700, SHB720 hand blender. The whisk attaches to the removable gear mechanism and is used for whipping milk or other liquids.
Replacement is recommended if the whisk is bent, broken, or shows visible signs of wear.
Tool-free installation – the whisk attaches directly to the blender's gearbox.

Compatible Manufacturer Codes
SHB700/G

Compatible with Stollar models
SHB600, SHB610, SHB700, SHB720

To ensure compatibility, compare the model code with the label on your hand blender body or its packaging.

The Stollar STB700 blender blade is located in the lower part of the container (product code: STB700/03-10) and is responsible for chopping solid ingredients and blending liquids. This replacement blender blade is typically purchased when the original blade becomes worn or damaged and the Stollar STB700 blender no longer chops ingredients properly.

The stainless steel blender blade is usually replaced when it becomes dull or deformed. In service practice, blade wear is a common reason why the Stollar STB700 blender no longer chops ingredients properly, leading customers to look for a replacement blender blade.

Important: Before purchasing, compare the model number on the blender rating label with the listed compatible models to ensure the spare part is compatible.

Compatible manufacturer codes:
STB700/11-19

Suitable for Stollar blenders:
STB700

Compatible manufacturer codes:
BJE430/03

Suitable for Sage, Stollar Juicer:
BJE430
SJE430SIL

The Stollar blender shaft is one of the most crucial components for hand blenders (SHB600, SHB610, SHB700, SHB720) as it is in direct contact with the processed products and determines the devices efficiency. Spare parts, such as the blender shaft, are necessary to ensure the longevity and optimal performance of the blender. The Hand Blender Stollar SHB600, SHB610, SHB700, SHB720.'