Меню
Your Cart

Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)

Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)
Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)
Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)
New
Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)
Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)
Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)
Coffee boiler probe set with O-rings for Stollar and Sage BES920, BES980, BES990 coffee machines (SP0001816)

A set of two coffee boiler water level probes with O-ring seals is a genuine spare part for Stollar and Sage coffee machines: the Dual Boiler, the Oracle and the Oracle Touch.

The coffee boiler level probes are located in the boiler and allow the coffee machine to detect the water level. The O-rings seal the connections between the probes and the boiler.

The boiler water level probes are usually replaced if:
• a probe is cracked or broken;
• water leaks from the probe itself even after the O-ring seal has been replaced;
• after the probe has been cleaned, the coffee machine still does not detect the water level in the boiler, and testing has confirmed that the probe is faulty.

Before purchasing, check whether the probes themselves need to be replaced:
• if water leaks around the probe-to-boiler connection, first check the O-ring seal — if only the seal is damaged (product codes and manufacturer's diagram references: SP0001657, SP0102913, BES920/05.6, BES980/08.11, BES990/08.11), the probes do not need to be replaced;
• if the coffee machine does not detect the water level in the boiler, remove limescale deposits and other dirt from the probe. If the problem remains after cleaning, the probe may need to be replaced.

If the cause of the fault is unclear, it can be identified at the ATAR service centre.

Important: SP0001816 probes are intended for older-design machines in which the probes are sealed in the boiler with O-rings. Newer-design machines use SP0102125 probes with compression fittings. SP0001816 and SP0102125 are not directly interchangeable.

Machines manufactured up to the end of 2021 usually have the older-design probes, while machines manufactured from 2023 have the newer-design probes. Machines manufactured in 2022 may have either version, so before purchasing, check how the existing probes are mounted and compare them with the product photograph.

For safety: before replacing the probes, disconnect the coffee machine from the mains and allow it to cool completely.

Compatible manufacturer codes:
SP0001816

Manufacturer's diagram references for the probes:
BES920/03.9
BES980/06.8
BES990/06.8

Suitable for older-design Stollar and Sage coffee machines whose probes are sealed with O-rings:
BES920 the Dual Boiler
SES920 the Dual Boiler
BES980 the Oracle
SES980 the Oracle
BES990 the Oracle Touch
SES990 the Oracle Touch

18.34 €
Ex Tax: 15.16 €
  • Stock: 1
  • Kods1: 7083632
  • Kods2: SP0001816
  • Kods3: BES920/03.9
  • Kods4: BES980/06.8
  • Kods5: BES990/06.8
  • Barcode: 9997277083632
Stollar/Sage

Товар в настоящее время отсутствует на складе. Введите свой адрес электронной почты ниже, и мы уведомим вас, как только товар появится в нашем интернет-магазине.
Name
Email
Phone
🇱🇻
  • 🇱🇻
  • 🇪🇪
  • 🇱🇹
Comments