Meat grinders - page 2

Stollar SHREDDER ASSY BNG750 | BNG751 | BMG752 | BMG755 | BMG756 | BMG757 | BMG758

Stollar the Power Grind BMG900, BMG750, BMG570

The reducer for the Stollar BMG720 meat grinder is a spare part that, through a gear system, provides power transmission to the meat grinders auger shaft. Designed for the Stollar BMG720 model, ensuring efficient meat grinding and a long service life for the grinder.'

If the meat is ground unevenly or the mechanism slows down, the blade may be dull or damaged.
Replacing the blade may improve grinding quality and eliminate mechanical issues.
This meat grinder blade is compatible with Stollar BMG550, BMG590, BMG600, BMG720, BMG800, BMG820 and BMG850 models.
Blade replacement is offered as a possible solution.

Compatible codes:
BMG600/25, BMG800/1-17, BMG820/X8

Compatible models:
BMG550, BMG590, BMG600, BMG720
BMG800, BMG820, BMG850

Replace the medium meat grinder plate on your Stollar BMG570, BMG750, BMG900 or BMG750/02B meat grinder if it is worn, deformed or mechanically damaged.
If minced meat becomes too coarse, remains unground or loses its uniform texture, this usually indicates wear or damage to the grinding plate.

Replacing this Stollar spare part is a simple way to fix these issues and restore the consistency of minced meat.
The medium plate replacement can be easily carried out at home.

Important: Before purchasing, check compatibility with your Stollar meat grinder model.

Compatible Manufacturer Codes
BMG750/02B, BMG570/02B

Compatible with Stollar Meat Grinders
BMG570, BMG750, BMG900

The grinder auger Stollar BMG915 guides meat directly toward the blade and ensures a steady feed flow during grinding. If the motor runs but the screw does not rotate, the cause is usually a worn or deformed drive screw for meat mincer (BMG915).
Replacing the meat grinder screw often eliminates feed interruptions and restores normal operation by removing the source of the fault.
Important: make sure that the malfunction is directly related to the meat grinder auger. The spare part can be replaced at home without completely disassembling the meat grinder.

Compatible Manufacturer Codes
BMG915

Compatible with Stollar Meat Grinder
BMG915

The feed tray located at the top of the Stollar BMG750 and BMG900 meat mincers serves as a container for placing meat before it reaches the grinding unit. This feeding tray is designed to guide meat efficiently into the Stollar meat grinder during preparation.

The meat grinder tray is usually replaced if it is cracked, deformed, or its fasteners are damaged, preventing the meat from reaching the grinding unit.

The tray can be replaced at home, as it can be removed and installed without special tools. Important: To ensure this is the correct spare part, compare the model number on your meat mincer with the compatible list below.

Compatible manufacturer codes
BMG750/09
BMG900/09

Suitable for Stollar meat grinders
BMG750
BMG900

The meat grinder plate (reversible meat grinder plate) is an original Stollar spare part designed for BMG570, BMG750, and BMG900 meat grinders.
It forms a coarse mince texture suitable for preparing minced meat, sausages, and other dishes.

If the minced meat becomes too fine or the grinder operates under increased load, the plate may be worn or deformed.
This spare part replacement is a simple way to correct these issues and fully restore your meat grinder’s performance. The replacement can be carried out easily at home.

Important: Before purchasing, check that the part is compatible with your Stollar meat grinder model.

Compatible manufacturer codes
BMG750/02A, BMG570/02A

Compatible with Stollar meat grinders:
BMG570, BMG750, BMG900

Meat grinder mincer as a spare part for the meat grinder ensures the grinding of meat and other food products. If the mincer is worn out, deformed, or damaged, replacement can help resolve these issues and restore the function of the meat grinder.

Compatible codes:
BMG470/03-8. BMG470/03
Suitable for Stollar Meat Grinder:
BMG470

Meat grinder spare part for Stollar BMG800 model – if the mechanism stops, the motor runs but the gear does not turn, or there is rattling during operation, the gearbox gear may be worn or broken. Possible causes include wear, overvoltage, or damage to the plastic material. Replacement of the spare part is offered as a potential solution.

In Stollar BMG420 and BMG430 meat mincers, the auger moves meat towards the blade during grinding. When meat remains at the start of the thread and does not move forward, the most common cause is a worn feed screw.

In many cases, wear of the auger affects how meat moves through the grinding chamber during operation.

Important: Before purchasing this spare part, visually check whether the issue is related to the auger, as similar symptoms can be caused by other meat grinder components. Replacement is usually possible at home without fully disassembling the appliance.

Compatible manufacturer codes:
BMG430/04

Suitable for Stollar meat grinders:
BMG420
BMG430

In Stollar BMG450 and BMG470 meat mincers, the auger moves meat towards the blade during grinding. When meat remains at the start of the thread and does not move forward, the most common cause is a worn feed screw.

In many cases, wear of the auger affects how meat moves through the grinding chamber during operation.

Important: Before purchasing this spare part, visually check whether the issue is related to the auger, as similar symptoms can be caused by other meat grinder components. Replacement is usually possible at home without fully disassembling the appliance.

Compatible manufacturer codes:
BMG450/1-5, BMG470/1-5

Compatible with Stollar Meat Grinders:
BMG450
BMG470

Replacement blade for Stollar meat grinders – models BMG570, BMG740, BMG750, BMG900, and BMG910. Designed to replace a dull or damaged blade that can no longer grind meat effectively.

If grinding becomes uneven, meat remains in chunks or the mechanism runs idle, the blade is likely worn out and needs to be replaced. Restores full grinding functionality. Can be replaced at home without special tools.

Compatible OEM codes:
BMG750/03, BMG570/03, BMG900/03, BMG910/03

Fits Stollar models:
BMG570, BMG740, BMG750, BMG900,
BMG910

The original fixing ring (nut) for the Stollar BMG430 meat grinder. This part ensures the fixation of the knife and the grid (mincing plate).
Replacement is necessary if the existing ring is damaged, the thread is worn out, or it can no longer fix the grid in place.
Replacement is simple and can be done at home.

Compatible manufacturer codes
BMG430/1, BMG430/H

Suitable for Stollar meat grinders
BMG430

Important: Before making a purchase, make sure that your meat grinder model is in the list of compatible models. The model is usually indicated on the device body or the manufacturer's plate.

The reducer for the Stollar BMG570 meat grinder is a spare part that, through a gear system, provides power transmission to the meat grinders auger shaft. Designed for the Stollar BMG570 model, ensuring efficient meat grinding and a long service life for the grinder.'

The feed tray located at the top of the Stollar BMG720 and BMG820 meat mincers serves as a container for placing meat before it reaches the grinding unit. This feeding tray is designed to guide meat efficiently into the Stollar meat grinder during preparation.

The meat grinder tray is usually replaced if it is cracked, deformed, or its fasteners are damaged, preventing the meat from reaching the grinding unit.

The tray can be replaced at home, as it can be removed and installed without special tools. Important: To ensure this is the correct spare part, compare the model number on your meat mincer with the compatible list below.

Compatible manufacturer codes

Suitable for Stollar meat grinders
BMG720
BMG820

The feed screw shaft of the Stollar BMG915, BMG910, BMG900, BMG750, BMG570 (for new models) meat grinders guides meat directly to the blade area, maintaining a smooth and consistent flow during grinding. If, while the motor is running, meat starts to accumulate at the beginning of the thread, the most likely cause is a worn or deformed auger screw.

In many cases, replacing the auger helps eliminate feed interruptions and correct the described symptoms by removing the root cause of the fault.

Important note: The meat grinder auger screw has a hex end. If your previous auger had a square end, you will also need to order the corresponding meat grinder gear (product code: BMG570/40).

Important: Ensure that the malfunction is directly related to the meat grinder screw. This spare part can be replaced at home without the need to fully disassemble the meat grinder.

Compatible Manufacturer Codes
BBMG915/04, BMG910/04, 
BMG750/04, BMG900/04
BMG570/04

Compatible with Stollar Meat Grinders
BMG915
BMG910
BMG900
BMG750
BMG570