Spare parts catalog
This is the original power board (main control board) designed for Stollar BES870 and Sage SES875 coffee machines.
If the machine does not turn on, restarts by itself, or switches off under load, replacing this spare part may help resolve the issue.
A new power board restores the coffee machine’s original functionality.
Important
Before purchasing, make sure this part is compatible with your coffee machine model.
Remember that an accurate fault diagnosis can only be confirmed after inspection at a service center.
Compatible manufacturer codes
BES870/13.3, SP0001597
Compatible with Stollar, Sage coffee machines
BES870, SES875
Thermal paste is an important auxiliary material used when installing or replacing coffee machine spare parts that require thermal conductivity. It ensures good heat transfer between the heating block and the temperature sensor or metal surface. The 5ml syringe makes it easy to apply the right amount during maintenance or repair.
8080015138, MS-5A10637, MS-5A10374, KRUPS HEATING ELEMENT + JACK
Compatible codes: 00642185| 0045027| 642185Siemens Bosch drip tray steel surface Siemens| Bosch| NivonaStainless steel drip tray suitable for the Siemens TK5**, Bosch TCA5** fully automatic coffee machines listed below.Delivery scope:1x Siemens Bosch drip tray steel surface
Introducing the Jura Espresso Button in Silver, designed specifically for the F50 and XF50 models. This high-quality replacement part ensures seamless functionality and a sleek aesthetic for your Jura coffee machine. Crafted with precision, the button offers a smooth, responsive touch for effortless espresso brewing. Ideal for maintaining the performance and appearance of your machine, this component is easy to install and built to last. Identify this essential Jura part online with the supplier code 66926. Enhance your coffee experience with this reliable and stylish espresso button.
"""'""""'Replacement part for coffee machine – water tank for Jura S series coffee machines, designed for use with Claris White water filter. If the display shows the message """"""""Fill water"""""""" even though the tank is full, the magnet or level sensor may be faulty. Replacing the water tank may resolve this issue. Accurate damage assessment can only be made after diagnostics at the ATAR service center – therefore, replacement is offered as a possible solution, not a guaranteed defect resolution. Compatible item codes: 62026 Suitable for the following Jura coffee machines: IMPRESSA 500 Anthracite (12725), IMPRESSA 500 White (12726) IMPRESSA 300 Anthracite (12740, 12741) IMPRESSA 300 White (12742, 12743) IMPRESSA Scala Vario graphite (12765, 12782, 12865), white (12832, 12866, 12868), black (12867, 12877, 12882) IMPRESSA Ultra Anthracite (12767, 12773), Ultra White (12768, 12774, 12878) IMPRESSA Scala graphite (12772, 12861, 12863), (12871, 12872, 12917) IMPRESSA Scala projector (12776) IMPRESSA Cappuccinatore black (12830, 12831, 12847) IMPRESSA 5000 White (12857), Anthracite (12858) IMPRESSA 3000 Anthracite (12859), White (12860) IMPRESSA Scala Vario Plus black (12883) IMPRESSA S50 black (12918), blue (12954) IMPRESSA S70 black (12920), white (12922), blue (12960) IMPRESSA S90 black (12924, 12951, 13935) IMPRESSA S95 platinum (12926, 12950, 13108), (13134) IMPRESSA M30 black HP (12956) IMPRESSA Scala scale graphite (13017) IMPRESSA S55 platinum (13089, 13195) IMPRESSA S9 cappuccino (13124, 13259, 13936) IMPRESSA S9 platinum (13154, 13208, 13215), (13225, 13257, 13279), (13285, 13298) IMPRESSA S75 platinum (13173) IMPRESSA S7 black (13179, 13262, 13289) IMPRESSA S8 platinum (13180) IMPRESSA S9 OT platinum (13361, 13423, 13424), (13448, 13520) IMPRESSA S9 OT platinum 0-Energy EUP (13506, 13581) IMPRESSA S9 OT black 0-Energy EUP (13570) IMPRESSA S9 classic AROMA+ (13659, 13736) IMPRESSA S9 classic (13674) IMPRESSA S85 platinum (13965)'""""'""'"'
Introducing the Coffee Spout for Coffee Brewing Unit Melitta, Nivona (Supplier Code: 942695). This high-quality replacement part is designed to ensure optimal performance and longevity for your coffee brewing unit. Compatible with both Melitta and Nivona models, this coffee spout facilitates a smooth and efficient coffee flow, enhancing your brewing experience. Made from durable materials, it withstands daily use while maintaining the integrity of your machine. Easy to install and maintain, this coffee spout is an essential component for coffee enthusiasts seeking consistent quality. Ensure your coffee maker operates at its best with the Coffee Spout (942695).
Compatible codes: AS00004224, 5513240661, DeLonghi PCB LCD GDS(IFD)+SUP DISPLAY ECAM2346EX4 DeLonghi control board display ECAM23.460.B EX:4 S11. ECAM23.460.B EX:4 S11, ECAM23.460.S EX:4 S11, ECAM23.460.SB EX:4 S11, ECAM23.460.W EX:4 S11, ECAM23.463.B EX:4 S11, ECAM23.466.B EX:4 S11, ECAM23.466.S, ECAM23.466.S EX:4 S11 On the display, there is a white label with the Cod. DeLonghi number starting with 52 ..., this number must match one of the Cod.Delonghi listed below: AS00004224, 5513240661 Delivery scope: 1x DeLonghi control board display ECAM23.460.B EX:4, ECAM23.466.B EX:4
The ground coffee cover is an original spare part for Jura Impressa F7, Impressa F8, F9 and Impressa F900 coffee machines.
This pre-ground coffee lid is usually replaced if it is cracked, warped or mechanically damaged.
The lid closes the ground coffee funnel of the coffee machine and helps restore the original appearance of the machine.
Important: To make sure this is the correct spare part, compare the model number of your Jura coffee machine, shown on the rating label, with the compatible model list below.
Compatible manufacturer codes
70672
Suitable for Jura coffee machines
F7 IMPRESSA Piano Black 13639
F7 IMPRESSA Platin 13722
F8 IMPRESSA TFT / Piano Black 13636
F8 IMPRESSA TFT / Piano Black 13731
F8 IMPRESSA TFT / Chrome 13732
F8 IMPRESSA TFT / Piano Black 13733
F8 IMPRESSA TFT / Piano Black 14123
F8 IMPRESSA TFT / Chrome 14124
F9 Aluminium 15094 no 2015. gada
F9 Black 15095 no 2015. gada
F900 IMPRESSA Black 13430
F900 IMPRESSA Platin 13431
Introducing the Kuppersbusch Heating Element Connector, a reliable solution for ensuring seamless connectivity in your heating systems. Designed with precision and durability in mind, this connector is essential for maintaining optimal performance in your Kuppersbusch appliances. The connector is crafted from high-quality materials to withstand high temperatures and ensure long-lasting use. For easy identification and compatibility verification, refer to the supplier code: 534766. This code ensures you receive the exact component needed for your specific model, minimizing downtime and enhancing efficiency. Ideal for both residential and commercial applications, the Kuppersbusch Heating Element Connector is your go-to choice for dependable heating system maintenance. Upgrade your appliance connectivity today with the Kuppersbusch Heating Element Connector, and experience the difference in quality and performance.
Siemens/Bosch coffee brewing unit lock with two springs. Suitable for coffee machines Siemens EQ.5 / 6 / 7 / 8, Bosch Vero, VeroProfessional, VeroAroma. It is a spare part inside the coffee machine and serves as a lock for the coffee brewing unit.
The water tank lid with a chrome-plated top and black plastic base is an original Jura spare part for automatic coffee machines, designed to tightly close the tank and protect the water from external contamination.
Replace the lid if it is cracked, deformed, or mechanically damaged to prevent foreign particles from entering the coffee machine system.
Replacing a damaged lid is necessary to prevent water contamination inside the tank.
Important: Before purchasing, check the compatibility of this spare part with your Jura coffee machine model.
Compatible manufacturer codes
74133
Compatible with Jura ENA 5 (EA) and ENA 8 coffee machines
Jura ENA 8 Metropolitan Black
15253, 15281, 15292, 15315, 15319, 15473
Jura ENA 8 Nordic White
15239, 15239ZA, 15280, 15284, 15314, 15320
Jura ENA 8 Sunset Red
4008SA, 15255, 15282, 15291, 15316, 15318
Jura ENA 5 (EA) Night Inox
The brewing unit (brew group) compresses ground coffee and ensures proper extraction during the coffee preparation process. Suitable for DeLonghi Rivelia coffee machines of the EXAM440 series.
If your machine displays the errors “Brew Unit Blocked” or “General Alarm”, produces unusual noises, or directs coffee into the grounds container, the issue is often related to the brewing unit’s malfunction. Replacing this spare part most often helps to resolve these symptoms and restore the brewing process.
Replacement can be done independently.
Important: Before purchasing, make sure this spare part is compatible with your DeLonghi Rivelia coffee machine model.
Please note that the exact cause of the fault can only be determined after diagnostics performed at the Atar Service Center.
Compatible Manufacturer Codes
AS00006789, 11329125
Compatible with DeLonghi Rivelia coffee machines
EXAM440.35.BG, EXAM440.35.B, EXAM440.35.W,
EXAM440.55.BG, EXAM440.55.B, EXAM440.55.G,
EXAM440.55.W, EXAM441.55.GR
The bean hopper lid is an original spare part designed for Melitta coffee machines: Latticia OT, Avanza. It closes the bean hopper and protects the beans from dust, moisture and loss of odors.
Replacement is usually necessary if the existing lid is cracked, deformed or otherwise damaged. Damage to the bean container lid most often occurs due to natural wear and tear or external physical factors.
Important: before purchasing a spare part, make sure that it is compatible with your Melitta coffee machine model. Replacement is easy and can be done at home.
Compatible manufacturer codes:
6769647
Suitable for Melitta coffee machines:
Latticia OT frosted black
F300-100
F30/0-100
F300-103
F30/0-103
Latticia OT Silver
F300-101
F30/0-101
Avanza Inmould
F270-100
F27/0-103
The brew thermostat is an original spare part for coffee machines in the Gaggia Evolution Espresso, Baby, Baby Twin, New Baby, Classic, New Classic, Classic E24 and Classic 30 series.
The coffee boiler thermostat screws into the boiler. It controls boiler heating and cuts power to the heating element when the temperature reaches 107 °C.
The contact thermostat is usually replaced if:
• the coffee machine does not heat water;
• the coffee is cold or only lukewarm;
• during coffee preparation, the group head dispenses very hot water with steam or only steam.
Before purchasing, check that the existing thermostat is marked 107 °C. Do not confuse it with the 145 °C steam thermostat, whose manufacturer codes are 421946504771, 996530054612 and DM1288.
If the cause of the fault is unclear, the ATAR service centre can help identify it.
Important: Before purchasing, check whether your Gaggia coffee machine model is included in the list of compatible models and compare the existing thermostat with the product photo.
Compatible manufacturer codes:
421946504761
996530054556
DM1168
DM1168/K
Suitable for Gaggia coffee machines:
Gaggia Evolution Espresso
RI8152/11 Evolution Espresso Ivory
RI8152/12 Evolution Espresso Ivory
RI8152/38 Evolution Espresso Red Metallic
RI8152/50 Evolution Espresso Silver
RI8152/60 Evolution Espresso Black
Gaggia Baby
RI8155/60 Baby Black & Silver
RI8157/40 Baby Stainless Steel
Gaggia Baby Twin
RI8159/03 Baby Twin Stainless Steel
RI8159/40 Baby Twin Stainless Steel
RI9301/21 Baby Twin Stainless Steel
Gaggia New Baby
RI9301/11 New Baby Black & Silver
RI9301/41 New Baby 06 Class
RI9301/51 New Baby 06 Dose Silver
Gaggia Classic
RI8161/40 Classic Stainless Steel
RI9303/01 Classic Stainless Steel
RI9303/02 Classic Stainless Steel
RI9303/11 Classic Stainless Steel
Gaggia New Classic
RI9480/11 New Classic Stainless Steel
RI9480/12 New Classic Red
RI9480/13 New Classic White
RI9480/14 New Classic Black
RI9480/15 New Classic Blue
RI9480/16 New Classic Grey
RI9480/18 New Classic Stainless Steel
Gaggia Classic 30
RI9480/17 Classic 30 Limited Edition
Gaggia Classic E24
RI9481/11 Classic E24 Inox
RI9481/12 Classic E24 Red
RI9481/13 Classic E24 White
RI9481/14 Classic E24 Black
RI9481/15 Classic E24 Blue
RI9481/16 Classic E24 Grey
RI9481/17 Classic E24 Green
RI9481/18 Classic E24 Yellow
RI9481/19 Classic E24 Lobster
The drip tray grid is a genuine spare part for Stollar The Barista Express BES870 and Sage the Barista Express™ BES870, BES875 and SES875 coffee machines.
The drip tray plate sits on top of the drip tray and provides a surface for placing cups.
The drip tray grille is compatible with drip tray SP0001582 (BES870/09.1).
The drip tray grate is typically replaced if:
• the grille is damaged;
• the grille is missing.
Important: before purchasing, check whether your Stollar, Sage or Breville coffee machine model is included in the compatible models list and compare the drip tray grille you are replacing with the product photo.
Compatible manufacturer codes:
SP0001584
BES870/09.5
BES870XL/09.5
BPBES87009.5
Suitable for Stollar, Sage and Breville coffee machines:
Stollar
BES870 The Barista Express
Sage
BES870 the Barista Express™
BES875 the Barista Express™
SES875 the Barista Express™
Breville
BES870 the Barista Express™
BES870XL the Barista Express™
BES870BSXL the Barista Express™
