Spare parts catalog - page 56

The complete brew group is an original spare part for Krups Nespresso Atelier XN890831, XN8908CH, XN890840, XN890810, XN890810R and Nespresso Atelier NL890880, NL8908KR, NL890810 capsule coffee machines.

The infuser assembly is located in the capsule insertion area, pierces the capsule and directs water through the capsule during coffee preparation.

This brewing piston is usually replaced if any of the following symptoms appear:
Water or coffee leaks past the capsule and runs into the used capsule container;
The capsule is only partially pierced or not fully pierced;
The capsule mechanism jams or the capsule gets stuck;
Pressure is lost during brewing and coffee does not flow into the cup.

Important: To ensure compatibility, check that your Nespresso coffee machine model number matches the compatible models list.

Compatible manufacturer codes:
MS-8030001307

Suitable for Krups and Nespresso Atelier coffee machines:
Krups Nespresso Atelier
XN890831/700
XN8908CH/700
XN890840/700
XN890810/70B
XN890831/70B
XN890840/70B
XN8908CH/70B
XN890810/70A
XN890831/70A
XN890840/70A
XN8908CH/70A
XN890810/700
XN890810/70D
XN890831/70D
XN890840/70D
XN8908CH/70D
XN890810/70C
XN890831/70C
XN890840/70C
XN8908CH/70C
XN890810R/70C
XN890810R/70D

Nespresso Atelier
NL890880/70A
NL8908KR/70A
NL890810/70B
NL890825/70B
NL890827/70B
NL890846/70B
NL890810/700
NL8908B2/700
NL890858/70B
NL8908B2/70A
NL890859/70B
NL890827/700
NL890860/70B
NL8908KR/700
NL890865/700
NL890865/70B
NL890846/700
NL890880/70B
NL890825/700
NL8908B1/70A
NL890858/700
NL8908B2/70B
NL8908B1/700
NL8908JP/70A
NL8908KR/70B
NL890860/700
NL890859/700
NL890880/700
NL8908JP/700
NL890810/70A
NL890825/70A
NL890827/70A
NL890846/70A
NL890858/70A
NL890859/70A
NL890860/70A
NL890865/70A
NL890865/70C
NL890880/70C
NL8908B2/70C
NL8908KR/70C
NL8908B1/70B
NL8908JP/70B
NL890860/70D
NL890865/70D
NL890880/70D
NL8908JP/70C
NL8908KR/70D
NL890810/70D
NL890825/70D
NL890827/70D
NL890810/70C
NL890825/70C
NL890827/70C
NL890858/70C
NL890860/70C

Compatible codes: 22000, 5113211281, 770100281, 38167603, 511321128Water pump Olab EP22000 48W 230V 50Hz. If the pump no longer generates sufficient pressure, the coffee no longer tastes as good, the coffee flow becomes weaker, and the pump is very noisy during operation, these are most often signs of improper pump function. Alternative to Ulka water pump EP5 48W 230V 50Hz, product code: 5132106900, 770100281, 38167603, 511321128, Ulka Vibration pump, ULKA PUMPDelivery scope: 1x Water pump Olab EP22000 48W 230V 50Hz

Introducing the Saeco Philips Water Spout Intelia 996530072651, a premium replacement part designed to enhance the performance of your Saeco Philips coffee machine. This genuine water spout ensures optimal water flow and distribution, contributing to the perfect brew every time. Crafted with precision, it is compatible with Intelia models, ensuring a seamless fit and easy installation. For those seeking reliability and quality, the Saeco Philips Water Spout Intelia, identified by supplier code 996530072651, is the ideal choice to maintain your coffee machines efficiency. Upgrade your brewing experience with this essential component today.'

996530034332, 286851855, Saeco / Gaggia / Philips MOTOR AS.120V NEW MAGIC DE LUXE

5313223081, ECAM 22.360.B, ECAM 22.360.S, ECAM 22.366.B, ECAM 22.366.S, ECAM 23.450.B, ECAM 23.450.B EX:3, ECAM 23.450.S, ECAM 23.450.S EX:3, ECAM 23.460.B, ECAM 23.463.B, ECAM 23.466.B, ECAM 23.466.S, ECAM 24.450.S, ECAM 24.467.S, ECAM 25.452.S, ECAM 25.457.B, ECAM 25.457.S, ECAM 25.462.B, ECAM 25.462.S

Bosch TCC78K750, Bosch TCC78K751, Siemens TK76K572, Siemens TK76K573. Siemens, Bosch water tank handle for built-in coffee machines.

Introducing the Saeco Drip Tray White Xelsis HD894*, a premium replacement part designed to enhance the performance and aesthetics of your Saeco Xelsis espresso machine. Crafted with precision, this white drip tray seamlessly integrates with your machine, ensuring efficient collection of excess water and coffee drips. Its durable construction guarantees long-lasting use, while the sleek white finish complements any kitchen decor. Easily identifiable by the supplier code 996530006734, this drip tray is an essential component for maintaining the cleanliness and functionality of your Saeco Xelsis HD894* model. Upgrade your coffee experience with this reliable and stylish accessory.

Krups GENIO S KP243, Genio S White KP2431, DeLonghi GENIO S EDG226.W, EDG226.A

The control panel unit with the display is the main electronic module that ensures the operation of the DeLonghi PrimaDonna ESAM6600 coffee machine – from temperature control and pump activation to processing user interface commands. Compatible with the power board product code no.: 5232119800.

If the display does not turn on, blinks, does not show symbols, the machine does not respond to buttons or performs actions on its own, this most often indicates a failure of the control panel.

ATAR service experience shows that in many cases replacing the display helps to eliminate the described symptoms by eliminating the cause of the defect.

Important: Before purchasing, make sure that the control panel matches your DeLonghi PrimaDonna ESAM6600 coffee machine model. There is a sticker with the DeLonghi code number on the control panel: the number must match one of the Compatible Manufacturer Codes. The exact defect can only be determined after diagnostics at the ATAR service center.

Compatible Manufacturer Codes:
5232115700, 5232113300

Suitable for De'Longhi coffee machines:
PrimaDonna
ESAM6600

Power Board for DeLonghi Magnifica Plus ECAM 320.70.TB, ECAM 322.70.SB coffee machine.

Compatible manufacturer codes:
AS00007766

Suitable for DeLonghi coffee machines:
ECAM 320.70.TB Magnifica Plus
ECAM 322.70.SB Magnifica Plus 

Compatible manufacturer codes
0100860,100860

Suitable for Nivona coffee machines
NICR 1030 CafeRomatica Titanium (Typ 568)
NICR 1040 CafeRomatica Titanium (Typ 568)

The removable water tank assembly is a genuine spare part for DeLonghi NESCAFÉ Dolce Gusto Genio EDG455 and EDG456 models, as well as Krups NESCAFÉ Dolce Gusto Genio KP1500, KP1502, KP1506, KP1508, and KP1509 models.

The water reservoir is located at the back of the coffee machine and supplies the water needed to prepare drinks.

The water tank is usually replaced if:
• water leaks from the tank due to cracks or deformation;
• water leaks from the tank valve when the tank is filled, lifted, or moved;
• the tank is deformed and cannot be fully inserted or is difficult to remove from the coffee machine.

Important: before purchasing, check that your NESCAFÉ Dolce Gusto Genio coffee machine model is included in the compatibility list and visually compare your existing tank with the product image.

Compatible manufacturer part numbers:
WI1335
MS-623038
MS623038

Suitable for NESCAFÉ Dolce Gusto Genio coffee machines:
DeLonghi
EDG455.B Genio
EDG455.BBG Genio
EDG455.G1 Genio
EDG456.S Genio
EDG456 Genio Fiorucci

Krups
KP150010
KP150031
KP150040
KP150231
KP150610
KP150631
KP1506E1
KP1506E2
KP150810
KP1508E2
KP150910
KP150931
KP150940
KP1509E1
KP1509E2

Introducing the DeLonghi Drip Tray Stainless Steel Surface ETAM 29.660, a premium accessory designed to enhance your coffee machine experience. Crafted from durable stainless steel, this drip tray offers a sleek and polished surface that seamlessly complements your DeLonghi coffee maker. Engineered for easy maintenance and long-lasting performance, it effectively collects spills and drips, ensuring a clean and tidy brewing area. The ETAM 29.660 model is specifically tailored for a precise fit, providing stability and support during use. For easy online identification and compatibility confirmation, reference Supplier Code: 6013213881. Upgrade your coffee setup with this essential DeLonghi drip tray today.

The silver-coloured left front panel is a genuine spare part for DeLonghi Eletta Top ECAM 45.366.S, PrimaDonna Class ECAM 550.75.MS, ECAM 556.55.MS and ECAM 556.75.MS, and PrimaDonna Class Evo ECAM 550.85.MS coffee machines.

The front housing panel is fitted to the front-left side of the coffee machine and covers the milk carafe connection area.

This front panel is usually replaced if:

• the retaining clips are broken, so the panel no longer locks into the housing, does not stay in place or may fall off;
• the panel is scratched, cracked, otherwise damaged or missing;
• persistent limescale marks or deposits on the panel spoil the appearance of the coffee machine.

Important: Before purchasing, please check whether your DeLonghi coffee machine model is included in the compatibility list and visually compare the old part with the product photo.

Compatible manufacturer part numbers:
5313247261

Suitable for DeLonghi coffee machines:
Eletta Top
ECAM45.366.S

PrimaDonna Class
ECAM550.75.MS
ECAM556.55.MS
ECAM556.75.MS

PrimaDonna Class Evo
ECAM550.85.MS