Steam nozzle for Jura A, C, ENA, and F series coffee machines (70096)

This milk frother nozzle is a genuine spare part for Jura A, C, ENA, and F series coffee machines.

The steam nozzle is located at the front of the coffee machine, within the coffee and milk dispensing assembly. During milk frothing, steam passes through the nozzle into the milk frother.

The steam nozzle is typically replaced if:
• the nozzle is cracked, deformed, or otherwise mechanically damaged;
• the nozzle is clogged with deposits and can no longer be fully cleaned;
• milk frothing performance has significantly deteriorated and does not improve after a thorough cleaning of the nozzle and milk system.

Before replacing the frothing nozzle, thoroughly clean the nozzle itself, the milk pipe, and the detachable parts of the milk frother. If milk frothing does not improve after cleaning, check if the coffee machine requires descaling and perform the procedure according to the Jura instructions.

If the cause of the issue is unclear, it can be further investigated at the ATAR service centre.

Important: Before purchasing, please verify that your Jura coffee machine model is included in the list of compatible models and compare the steam nozzle to be replaced with the product photograph.

Manufacturer part numbers:
70096

Suitable for Jura coffee machines:
A5 Impressa
A7
A9 Impressa
C8 (EA)
C9 (EA)
ENA 8
ENA 8 two cups
ENA Micro 8
ENA Micro 9
ENA Micro 90
F9 (from 2015)
F900 Expert