Меню
Your Cart

Household equipments catalog

Breville Water Tank Kit for Steam Generation (BFS800BSS/13)
Currently not available
Kods1: 4385934
Product code: SP0016109, BFS800BSS/13 Suitable for the following Breville steamers: BFS800
27.75 €
Ex Tax:22.93 €
Meat grinder plate Stollar BMG570, BMG750, BMG900 (BMG750/02A)
Currently not available
Kods1: 2578686

The meat grinder plate (reversible meat grinder plate) is an original Stollar spare part designed for BMG570, BMG750, and BMG900 meat grinders.
It forms a coarse mince texture suitable for preparing minced meat, sausages, and other dishes.

If the minced meat becomes too fine or the grinder operates under increased load, the plate may be worn or deformed.
This spare part replacement is a simple way to correct these issues and fully restore your meat grinder’s performance. The replacement can be carried out easily at home.

Important: Before purchasing, check that the part is compatible with your Stollar meat grinder model.

Compatible manufacturer codes
BMG750/02A, BMG570/02A

Compatible with Stollar meat grinders:
BMG570, BMG750, BMG900

12.88 €
Ex Tax:10.64 €
Stollar SJE530, BJE530 Juicer Filter Basket Sieve SJE530/04
Currently not available
Kods1: 8316593

Juicer filter basket is a spare part for Stollar SJE530 and BJE530 juicers.

Replacement is usually needed when more pulp remains in the juice than usual or the pulp comes out too wet. These symptoms often indicate a worn basket filter.

Important: To make sure this is the correct spare part, compare the model number on your juicer’s rating label with the compatible models listed below.

Compatible manufacturer codes:
SJE530/04, BJE530/04, SP0025603

Fits Sage Multi Cooker:
SJE530
BJE530

84.61 €
Ex Tax:69.93 €
Sage Juicer Lid SJE430, Breville BJE430 (SJE430/05')
Currently not available
Kods1: 4409083

Sulu spiedes vāks nav piemērots mazgāšanai trauku mazgājamā mašīnā

Svarīgi: ja sulu spiede neslēdzas, pārliecinieties, vai problēma ir saistīta ar pārsega drošības slēdzi, nevis motora defektu. Rezerves daļas nomaiņu iespējams veikt mājas apstākļos bez servisa iesaistes.

Saderīgie ražotāja kodi:
SJE430/05, SP0010397

Piemērots Sage, Breville sulu spiedēm:
SJE430, BJE430SIL

55.12 €
Ex Tax:45.55 €
Seal for Blender Jug Lid Sage SBL920, BBL920 (SBL920/03)
Currently not available
Kods1: 9592629
The gasket for the Sage SBL820, SBL920, and Breville BBL820, BBL920 blender jug lid ensures a watertight seal and prevents leaks. Replacement due to wear, leaks, or hygiene concerns is easily performed by the purchaser by removing the old gasket, cleaning the lid, and installing the new one. Compatible codes: SP0025003, SBL820/03, SBL920/03. Suitable for the following Sage, Breville blenders: Sage SBL820, SBL920, Breville BBL820, BBL920.
18.48 €
Ex Tax:15.27 €
Stollar Stainless Steel Jug STB570 (STB570/04)
Currently not available
Kods1: 9193869
Stollar Stainless Steel Cup without Lid STB570
34.68 €
Ex Tax:28.66 €
Blender Lid Sage/Breville BBL550, BBL620, BJB840 (SP0016078)
Currently not available
Kods1: 9528506

This is a genuine blender lid with a ring pull and silicone seal, designed for Sage and Breville blenders. It provides a secure seal to prevent leaks and splashes during blending. The removable central cap allows for easy addition of ingredients while the blender is in operation.

If your blender lid is damaged or lost, replace it to continue using your appliance safely and effectively. Replacement is simple and can be done at home.

Compatible manufacturer codes SP0016078

Suitable for Sage and Breville blenders
Breville: BBL500, BBL550, BBL560, BBL600,
BBL605, BBL620, BJB840
Sage: SBL620

Important: To ensure this is the correct lid for your blender, compare your blender's model number, found on the sticker on the appliance's body, with the list of compatible models above.

20.25 €
Ex Tax:16.74 €
Stollar Juice Extractor Filter Bowl 800JE, BJE820, BJB840 (BJB840/136)
Currently not available
Kods1: 5686182

Saderīgie ražotāja kodi
BJB840/136, BSE820/17, 800JE/12
SP0002273, SP0000266

Piemērots Sage, Breville sulu spiedem:
BJB840
BSE820
800JE

69.06 €
Ex Tax:57.07 €
Stollar Pan with 3.5L Basket Holder AIR735 (AIR735/78-79')
Currently not available
Kods1: 5490150
Introducing the Stollar Pan with 3.5L Basket Holder AIR735, a versatile kitchen essential designed for optimal cooking performance. Crafted with precision, this pan features a spacious 3.5-liter basket holder, perfect for frying, steaming, and sautéing your favorite dishes with ease. The durable construction ensures even heat distribution, while the non-stick surface facilitates effortless food release and quick cleanup. Ideal for both home cooks and professional chefs, this pan is compatible with various stovetops, including induction. For easy identification and purchase, refer to the supplier code AIR735/78-79'. Elevate your culinary experience with the Stollar Pan AIR735 today.
16.47 €
Ex Tax:13.61 €
Stollar Chopping Bowl with Base SHB700 (SHB700/J')
Currently not available
Kods1: 4845023

The Stollar blender chopping container with base (model SHB700) is an essential accessory that ensures efficient chopping and mixing of products. The container helps maintain freshness and prevents ingredient splatter, while the base provides stability and ease of use during the blending process.

20.81 €
Ex Tax:17.20 €
Juice Extractor Cone Sage SCP600, BCP600 (SCP600/45)
Currently not available
Kods1: 0071902
If your Sage citrus juicers juice extraction cone is cracked, broken, or visibly damaged, the device cannot be used safely. Replace the damaged part with the original juice extraction cone (SCP600/45), designed for SCP600 and BCP600 models'
27.55 €
Ex Tax:22.77 €
Stollar Locking Ring BMG900, BMG750, BMG570 (BMG750/01')
Currently not available
Kods1: 0088262

Stollar the Power Grind BMG900, BMG750, BMG570

13.50 €
Ex Tax:11.16 €
Blender Jug for Stollar STB550, STB570 Blenders (STB570/56)
Currently not available
Kods1: 1862957

Stollar Blend&Grind STB550, STB570

26.19 €
Ex Tax:21.64 €
Currently not available
Kods1: 7897933
174.36 €
Ex Tax:144.10 €
Citrus juicer cone for food processor Stollar SPP800 (SPP800/27)
Currently not available
Kods1: 8245633

The citrus juicer cone used in the Stollar SPP800 food processor is mounted on the juicer filter screen (part code: SPP800/26) and directs the extracted juice into the collection container.

If more force is required during juicing and the amount of juice obtained is low, or visible damage appears on the cone mount, the cause is most often a worn or cracked juicer cone Stollar.
According to ATAR service experience, in many cases replacing the citrus juicer cone helps eliminate the described symptoms and remove the cause of the defect.

Important: before purchase, make sure that the replacement part for the juicer is compatible with your Stollar SPP800 food processor and that the issue is directly related to the juicer attachment. To resume juicing, complete disassembly of the food processor is not required. The part replacement is simple and can be done at home.

Compatible manufacturer codes
SPP800/27

Compatible with Stollar food processor:
SPP800

9.34 €
Ex Tax:7.72 €
Ribbed Plate Assembly for Sage BGR840 and Breville BGR820 Grills (BGR820/252)
Currently not available
Kods1: 9762424

The ribbed cooking plate is an original spare part for Sage The Smart Grill Pro BGR840 and Breville Smart Grill BGR820 electric grills. The plate fits into the grill’s cooking area and transfers heat from the heating element integrated into the plate to the food.

The ribbed plate assembly is removable and dishwasher-safe. It can be replaced at home.

The removable ribbed grill plate is usually replaced if the non-stick coating is scratched, worn or starts to peel. Replacement is also needed if the plate no longer heats or heats unevenly.

This spare part can also be replaced at the ATAR service centre.

Important: Before purchasing this spare part, compare your grill model number with the compatible model list below.

Compatible manufacturer codes
BGR820/252
SP0002185

Suitable for Sage and Breville grills
BGR840
BGR820

92.49 €
Ex Tax:76.44 €
Blender Jug for Stollar SPP700, SPP800 Food Processor (SPP700/23)
Currently not available
Kods1: 9520364
Stollar glass blender jug 1500 ml, for SPP700, SPP800 food processor, is a durable accessory for food and beverage preparation. Over time, the glass may scratch, crack, or accumulate hard-to-clean deposits, affecting safety and hygiene. It is recommended to replace the jug every few years or if there is damage. Compatible codes: SPP700/23, SPP700/23. Suitable for Stollar food processors: SPP700, SPP800.
20.72 €
Ex Tax:17.12 €
Plastic Washer for Stollar BMG590, BMG600, BMG720, BMG8 (BMG800/1-14)
No longer available
Kods1: 0342706

Meat grinder spare part, Stollar plastic washer, auger shaft for Stollar BMG590, BMG600, BMG720, BMG800 meat grinders. Compatible codes: BMG600/1-14, BMG720/1-14, BMG800/1-14 Suitable for Stollar meat grinders: BMG590, BMG600, BMG720, BMG800

3.18 €
Ex Tax:2.63 €
Blender Jug with Blades for SAGE BFP580 Food Processor (BFP580/36)
No longer available
Kods1: 5266362

This is the original blender jug with blades (blender container), designed for SAGE BFP580 and BFP580SIL food processors.
If the jug is cracked, the blades are blunt, or ingredients are no longer blended evenly, replacing this part often solves the problem.
After replacement, the blender will once again be able to fully perform all food processor functions.

Important
Before purchasing, make sure this is the correct part by comparing your food processor’s model number with the listed compatible codes.

Compatible manufacturer codes
BFP580/36, BFP580SIL/36, SP0016370

Suitable for SAGE food processors
BFP580, BFP580SIL

51.26 €
Ex Tax:42.36 €
Juicer lid for Stollar JES700 (JES700/02)
Currently not available
Kods1: 4047124

This juicer cover is a genuine replacement part for Stollar the Fruit & Veggie Juicer JES700.

The top lid, featuring an 85 mm wide feed chute, sits above the filter basket. Fruits and vegetables are inserted into the chute and gently guided downwards using the food pusher during the juicing process. The appliance will only operate if the lid is correctly positioned and secured with the safety locking arm.

The juicer lid is typically replaced if:
• the lid is cracked or broken;
• the lid is warped and no longer fits properly onto the filter container;
• the locking points are damaged, preventing the lid from being securely fastened.

If the juicer fails to start, check that the current lid is correctly positioned and secured with the safety locking arm before purchasing a replacement. Perform this check while the juicer is unplugged from the power supply.

Important: before purchasing, verify that your Stollar juicer model is included in the list of compatible models and compare the lid you are replacing with the product photo.

Product code:
JES700/02

Suitable for Stollar juicers:
JES700

14.52 €
Ex Tax:12.00 €
Currently not available
Kods1: 3884125
27.66 €
Ex Tax:22.86 €
Stollar Blender SNB550 Power Button with Wires (SNB550/15)
Currently not available
Kods1: 8260597

Introducing the Stollar Blender SNB550 Power Button with Wires, a crucial replacement part designed to restore the functionality of your Stollar Blender SNB550. This high-quality power button, identified by supplier code SNB550/15, ensures seamless operation and compatibility with your existing blender model. Engineered for durability and ease of installation, this component includes pre-attached wires for a hassle-free setup. Perfect for those looking to maintain the efficiency and longevity of their kitchen appliance, the SNB550/15 power button is an essential addition to your repair toolkit. Keep your blender running smoothly with this reliable replacement part.

8.41 €
Ex Tax:6.95 €
Air Fryer Cooking Basket 7.0 L with Control Panel – St (AIT770/46-54)
Currently not available
Kods1: 6302470

Compatible manufacturer codes: AIR770/46-54 Suitable for the following Stollar air grill: Stollar AIR770

54.82 €
Ex Tax:45.31 €
Sage SPR700, SPR680 Multi Cooker Lid Gasket SPR700/25
Currently not available
Kods1: 9842649

Compatible manufacturer codes:
SPR700/25, SPR680/05, SP0020147

Compatible with Sage Multi Cooker models:
SPR680
SPR700

8.98 €
Ex Tax:7.42 €
Stollar Sage Juice Filter BCP600 (SCP600/43')
Currently not available
Kods1: 7659551
Introducing the Stollar Sage Juice Filter BCP600, a must-have accessory for your juicing needs. Designed to enhance the performance of your juicer, this high-quality filter ensures smooth and pulp-free juice every time. Crafted with precision, it effectively separates juice from pulp, providing a refreshing and nutritious beverage. The Stollar Sage Juice Filter is easy to install and clean, making it a convenient addition to your kitchen routine. For seamless online identification, refer to the supplier code SCP600/43'. Upgrade your juicing experience with this essential filter and enjoy the pure taste of freshly extracted juice.
61.08 €
Ex Tax:50.48 €
Stollar Juice Extractor Filter Bowl BJE200, BJE410, SJE (BJE410/26')
Currently not available
Kods1: 1655604

The Stollar juicer filter basket or pulp container ensures that the extracted fruits and vegetables are effectively separated from the juice. Compatible with STOLLAR juicer BJE200, STOLLAR juicer BJE410, STOLLAR juicer, SJE95 SIL, STOLLAR juicer JE95

97.71 €
Ex Tax:80.75 €
Blender Jug Lid for Sage SBL820, SBL920 Blenders (SP0025002)
Currently not available
Kods1: 7378506

Spare part for blender, lid for glass blender jug, lid for glass blender jug is supplied without a gasket, which can be ordered separately (item code: SBL920/03, SP0025003). The lid should be replaced if it is cracked, deformed, poorly fitting, or no longer provides a seal. Compatible codes: SP0025002, SBL920/02. Suitable for the following Sage, Breville blenders: Sage SBL820, SBL920 Breville BBL820, BBL920.

83.85 €
Ex Tax:69.30 €
Perforated rack with gaskets Stollar AIR 770 air fryer (AIR 770/55-56)
Currently not available
Kods1: 0100686

The perforated rack with gaskets for the Stollar AIR770 air fryer (inner rack) (AIR770/55-56) does not collect liquids but ensures 360° hot air circulation during cooking.
If you notice excess condensation or restricted airflow, replacing the rack will restore optimal performance.
This part is designed for easy at-home replacement.

Compatible code:
• AIR770/55

Fits Stollar air fryer models:
• AIR770

18.04 €
Ex Tax:14.91 €
Blender Jug Lid for Stollar STB700 (STB700/01-02)
Currently not available
Kods1: 5741830

This original Stollar STB700 part features a silicone-sealed blender jug lid cover designed for a secure fit on Stollar blenders. It closes the container tightly and helps prevent splashing during blending.

If the Stollar blender lid is cracked, deformed or mechanically damaged, it should be replaced. The removable centre cap allows ingredients to be added without stopping the blending process. The replacement can be carried out at home without special tools.

Important: before purchasing, make sure that the spare part matches your blender model by comparing the number indicated on the appliance body with the compatible list. This replacement blender lid is designed for the Stollar STB700 series.

Compatible Manufacturer Codes:
STB700/01-02, STB700/01, STB700/02

Suitable for Stollar Blenders:
STB700

18.04 €
Ex Tax:14.91 €
Showing 91 to 120 of 199 (7 Pages)
Товар в настоящее время отсутствует на складе. Введите свой адрес электронной почты ниже, и мы уведомим вас, как только товар появится в нашем интернет-магазине.
Name
Email
Phone
🇱🇻
  • 🇱🇻
  • 🇪🇪
  • 🇱🇹
Comments