Household equipments catalog

The feed tray located at the top of the Stollar BMG750 and BMG900 meat mincers serves as a container for placing meat before it reaches the grinding unit. This feeding tray is designed to guide meat efficiently into the Stollar meat grinder during preparation.

The meat grinder tray is usually replaced if it is cracked, deformed, or its fasteners are damaged, preventing the meat from reaching the grinding unit.

The tray can be replaced at home, as it can be removed and installed without special tools. Important: To ensure this is the correct spare part, compare the model number on your meat mincer with the compatible list below.

Compatible manufacturer codes
BMG750/09
BMG900/09

Suitable for Stollar meat grinders
BMG750
BMG900

Compatible code:
AIR760/68
AIR745/121

Fits Stollar air fryer models:
AIR760
AIR745

Stollar Sage PULP CONTAINER

Meat grinder spare part for Stollar BMG800 model – if the mechanism stops, the motor runs but the gear does not turn, or there is rattling during operation, the gearbox gear may be worn or broken. Possible causes include wear, overvoltage, or damage to the plastic material. Replacement of the spare part is offered as a potential solution.

This is the original grinding jar lid, Reusable lid (storage lid for the grinding jar) for the Stollar SNB550 blender, designed to ensure a hermetic seal and prevent leaks.
If the lid is damaged or no longer closes tightly, replacing it restores safe use.
Replacement is simple and can be performed at home.

Important: Before purchasing, make sure this part is compatible with your Stollar SNB550 blender model.

Compatible manufacturer codes
SNB550/54

Suitable for Stollar blender
SNB550

Meat Mincer Blade Screw, Grinder Auger Locking Bolt, Mincer Shaft Screw

Compatible Manufacturer Codes:
BMG750/15

Compatible with Stollar Meat Grinders:
BMG910
BMG900
BMG750
BMG570

The reducer for the Stollar BMG720 meat grinder is a spare part that, through a gear system, provides power transmission to the meat grinders auger shaft. Designed for the Stollar BMG720 model, ensuring efficient meat grinding and a long service life for the grinder.'

Replacement blade for Stollar meat grinders – models BMG570, BMG740, BMG750, BMG900, and BMG910. Designed to replace a dull or damaged blade that can no longer grind meat effectively.

If grinding becomes uneven, meat remains in chunks or the mechanism runs idle, the blade is likely worn out and needs to be replaced. Restores full grinding functionality. Can be replaced at home without special tools.

Compatible OEM codes:
BMG750/03, BMG570/03, BMG900/03, BMG910/03

Fits Stollar models:
BMG570, BMG740, BMG750, BMG900,
BMG910

If the meat grinder's grinding chamber (meat grinder feeding tube) is broken, cracked or deformed, it can no longer be used safely. Replace the damaged part with an original Stollar spare part. Meat Grinder Screw Body.

Replacement is easy and can be done at home.

Compatible manufacturer codes:
BMG450/1-9

Suitable for Stollat ​​​​meat grinder:
BMG450

Stollar Sage Tea basket lid BTM800, the Tea Maker™ Sage BTM800

Compatible with: BKE820, SKE825 Soft opening lid with viewing window, BPA-free*, Sage Soft opening lid with viewing window

"""'""""'The Stollar SPP800 three-product pusher, also known as the """"""""Pusher,"""""""" is an accessory designed for Stollar juicers or similar food processing devices. This pusher allows for easy and safe insertion of food items into the device, such as a juicer, for efficient processing. The three-product pusher means it is designed to handle three different types of food products or various-sized ingredients simultaneously, providing the user with greater convenience and efficiency.'""""'""'"'

Blendera krūze nerūsējošā tērauda piemērota kā rezerves daļa Stollar STB570 blenderiem, paredzēta pārtikas produktu sajaukšanai un blendēšanai. To var viegli nomainīt bez instrumentiem, ja krūze ir bojāta vai deformējusies.
Saderīgie kodi:
STB570/04, STB570/04.31-37
Piemērota Stollar blenderim:
Stollar STB570

The juicer’s juice collector is a removable juice collection container designed for gathering squeezed juice.
The juice container attaches to the front of the appliance and can be replaced at home, as it is removed and installed without special tools.

Important: before purchasing, make sure the spare part is compatible with your Stollar juicer model.

Compatible manufacturer codes:
BJE410/06
JE95/06
SP0005820

Suitable for Stollar, Breville juicers:
BJE410
JE95

Stollar and Sage blender spare part for STB550 and STB570 – if the glass jug does not secure or leaks liquid from the bottom, the base may be damaged or worn out. Replacing the spare part is offered as a possible solution.

This is the original juice jug with lid (capacity up to 800 ml, Jug Juice Kit), designed for Sage and Breville BJE200 juicers.
If the jug is cracked, deformed or damaged, replacing it solves the problem.
Replacement is simple and can be done at home.

Important: Before purchasing, make sure this part is compatible with your Sage or Breville juicer model.

Compatible manufacturer codes
BJE200/18, SP0002297

Suitable for Sage, Breville juicers
BJE200

Replacement jug with blade assembly for Sage SBL820 and SBL920 blenders. If your blender starts working more slowly or no longer blends ingredients evenly, replacing the jug may help restore normal blending performance. This 2 litre jug supports smooth and efficient ingredient processing.

Compatible manufacturer codes
SP0025004, SBL920/04

Suitable for the following Sage, Breville blenders:
Sage 
SBL820, SBL920
Breville 
BBL820, BBL920

The citrus juicer filter, used in the Stollar SPP800 food processor, serves as the base/holder for the juice-pressing cone (part code: SPP800/27). The replacement part for the juicer SPP800 filters the drink, separating pulp and seeds from the prepared juice.

If, during pressing, the juice does not reach the container under the filter or the cone fixing point on the filter is damaged, the cause is most often a worn or deformed citrus juicer filter for the food processor.

According to ATAR service experience, in many cases replacing the juicer mesh Stollar SPP800 helps eliminate the described symptoms by removing the source of the defect.

Important: Before purchase, make sure that the citrus press accessory is compatible with your Stollar SPP800 food processor and that the defect is directly related to the citrus juicer filter. Replacing the part is simple and can be done at home without completely disassembling the food processor.

Compatible manufacturer codes
SPP800/26

Compatible with Stollar food processor:
SPP800

The blades of the Stollar Sage SPP700 and SPP800 blenders are made of stainless steel, ensuring durability and efficient mixing of ingredients. Over time, the blades may become dull, especially when processing hard ingredients frequently. This can reduce blender performance and extend blending time. Regular blade inspection and timely replacement will ensure optimal operation and longevity of your Stollar Sage blender.

SJE530 / BJE530 the Nutri Juicer™ Cold Plus juicer, top cover complete, Sage juicer lid is dishwasher safe.

The juicer lid is located above the filter basket and activates a safety switch that allows the device to turn on only with a properly closed lid.

The lid must be replaced if there are visible cracks, damaged latches or other mechanical deformation that prevents the safety switch from working and prevents the juicer from turning on.

Important: if the juicer does not turn on, make sure that the problem is related to the lid safety switch and not due to a motor fault. Replacing the spare part is simple and can be done at home without contacting a service centre.

Compatible manufacturer codes:
SJE530/02, SP0025601

Suitable for Sage and Breville juicers:
SJE530
BJE530

If your Stollar SNB550 grinding container is broken, cracked, or leaking, it can no longer be used safely. Replace the damaged grinding container (0.45 liters) with an original Stollar spare part designed for the SNB550 blender.

This is the original pressure release valve (valve steam release assembly) designed for Sage SPR680, SPR700 and Breville BPR680, BPR700 pressure cookers.

Replacement is required if steam escapes uncontrollably, if pressure is lost during cooking, or if the valve is damaged. Replacing this spare part restores proper steam control.

The replacement is simple and can be done at home.

Compatible manufacturer codes
SPR680/08, SPR700/14, SP0024055

Suitable for Sage, Breville pressure cookers
SPR680, BPR680, SPR700, BPR700