Household equipments catalog - page 5

Meat grinder spare part, Stollar plastic washer, auger shaft for Stollar BMG590, BMG600, BMG720, BMG800 meat grinders. Compatible codes: BMG600/1-14, BMG720/1-14, BMG800/1-14 Suitable for Stollar meat grinders: BMG590, BMG600, BMG720, BMG800

This is the original blender jug with blades (blender container), designed for SAGE BFP580 and BFP580SIL food processors.
If the jug is cracked, the blades are blunt, or ingredients are no longer blended evenly, replacing this part often solves the problem.
After replacement, the blender will once again be able to fully perform all food processor functions.

Important
Before purchasing, make sure this is the correct part by comparing your food processor’s model number with the listed compatible codes.

Compatible manufacturer codes
BFP580/36, BFP580SIL/36, SP0016370

Suitable for SAGE food processors
BFP580, BFP580SIL

The juicer lid is located above the filter basket and activates a safety switch that allows the device to turn on only with a properly closed lid.

The lid must be replaced if there are visible cracks, damaged latches or other mechanical deformation that prevents the safety switch from working and prevents the juicer from turning on.

Important: if the juicer does not turn on, make sure that the problem is related to the lid safety switch and not due to a motor fault. Replacing the spare part is simple and can be done at home without contacting a service centre.

Compatible manufacturer codes:
BJE520/03, SJE520/03, SP0002322

Suitable for Sage and Breville juicers:
SJE520
BJE500
BJE510
BJE520

Introducing the Stollar Blender SNB550 Power Button with Wires, a crucial replacement part designed to restore the functionality of your Stollar Blender SNB550. This high-quality power button, identified by supplier code SNB550/15, ensures seamless operation and compatibility with your existing blender model. Engineered for durability and ease of installation, this component includes pre-attached wires for a hassle-free setup. Perfect for those looking to maintain the efficiency and longevity of their kitchen appliance, the SNB550/15 power button is an essential addition to your repair toolkit. Keep your blender running smoothly with this reliable replacement part.

Compatible manufacturer codes: AIR770/46-54 Suitable for the following Stollar air grill: Stollar AIR770

Compatible manufacturer codes:
SPR700/25, SPR680/05, SP0020147

Compatible with Sage Multi Cooker models:
SPR680
SPR700

The Stollar juicer filter basket or pulp container ensures that the extracted fruits and vegetables are effectively separated from the juice. Compatible with STOLLAR juicer BJE200, STOLLAR juicer BJE410, STOLLAR juicer, SJE95 SIL, STOLLAR juicer JE95

Spare part for blender, lid for glass blender jug, lid for glass blender jug is supplied without a gasket, which can be ordered separately (item code: SBL920/03, SP0025003). The lid should be replaced if it is cracked, deformed, poorly fitting, or no longer provides a seal. Compatible codes: SP0025002, SBL920/02. Suitable for the following Sage, Breville blenders: Sage SBL820, SBL920 Breville BBL820, BBL920.

This original Stollar STB700 part features a silicone-sealed blender jug lid cover designed for a secure fit on Stollar blenders. It closes the container tightly and helps prevent splashing during blending.

If the Stollar blender lid is cracked, deformed or mechanically damaged, it should be replaced. The removable centre cap allows ingredients to be added without stopping the blending process. The replacement can be carried out at home without special tools.

Important: before purchasing, make sure that the spare part matches your blender model by comparing the number indicated on the appliance body with the compatible list. This replacement blender lid is designed for the Stollar STB700 series.

Compatible Manufacturer Codes:
STB700/01-02, STB700/01, STB700/02

Suitable for Stollar Blenders:
STB700

Blender spare part, Sage blender jug, blender jug without blade, jug for blender without blade, black base without blade. Compatible codes: BBL606/03, SP0010055, SP0010045, SP0010046, SP0010044, SP0000444, SP0000442, SP0000441, SP0000430. Suitable for Sage, Breville blenders: Breville BBL550, BBL600, BBL605, BBL606.

Stollar SPP600, Stollar SPP700

Virtuves kombaina rezerves daļa, kartupeļu rīvēšanas disks virtuves kombainiem Stollar SPP700. Ja produkts tiek sasmalcināts nevienmērīgi, vai disks ir deformēts vai bojāts, nepieciešama šīs detaļas nomaiņa. Disku var viegli nomainīt paša spekiem.

Saderigie kodi : SPP700/13, SPP700/13-SS DISC A/1
Piemērots Stollar virtuves kombainiem:
SPP700

The flat cooking plate is an original spare part for the Breville Smart Grill BGR820 and Sage The Smart Grill Pro BGR840 electric grills. The plate fits into the grill’s cooking area and transfers heat from the heating element integrated into the plate to the food.

The flat plate assembly is removable and dishwasher-safe. Replacement can be carried out at home.

The removable grill plate is usually replaced if the non-stick coating is scratched, worn or starts to peel. Replacement is also needed if the plate no longer heats up or heats unevenly.

The spare part can also be replaced at the ATAR service centre.

Important: Before purchasing this spare part, check your grill model number against the compatible model list below.

Compatible manufacturer codes
BGR820/251
SP0002184
BGR820FP

Suitable for Breville and Sage grills
BGR820
BGR840

Introducing the Stollar Sage Silicone Gasket, designed specifically for the Auger Shaft models BMG590, BMG600, BMG720, and BMG800. This high-quality silicone gasket ensures a perfect seal, enhancing the performance and longevity of your appliance. Engineered for durability and reliability, it effectively prevents leaks and maintains optimal functionality. The gasket is easy to install, providing a hassle-free replacement solution. For precise identification and compatibility, refer to the supplier code: BMG800/1-16-2'. Upgrade your appliance with this essential component and experience seamless operation.

Replacement frothing part for the Sage SMF600 model – if the froth is not airy enough or not forming at all in cappuccino mode, the cappuccino frothing disk may be damaged or worn out. This part is essential for achieving the correct texture, and replacing it can help restore milk frothing quality. Compatible item code: SMF600/17, SP0002498.

This is the original juicing screw (extraction mechanism), designed for the Stollar BJP700 juicer.
If the screw is damaged, worn out, or juice yield decreases, replacing this part often solves the problem.
Replacement is simple and can be carried out at home.

Important: Before purchasing, make sure this part is compatible with your Stollar juicer model.
Remember that the exact defect can only be confirmed after diagnostics at a service center.

Compatible manufacturer codes
BJP750/48

Suitable for Stollar juicers
BJP700

The Stollar mixing bowl lid SPP600 and SPP700 ensures safety, efficient mixing, and order in the kitchen. It protects ingredients from splattering, maintains freshness, and safeguards the device from damage.

Sage Tea Maker Power Base BTM800, STM800

Introducing the Sage Blender Jug 2L, compatible with models BBL910 and BBL915. This high-quality blender jug is designed to enhance your blending experience with its robust construction and spacious 2-liter capacity, perfect for both small and large batches. Crafted from durable, BPA-free materials, it ensures safe and efficient blending every time. The jug features easy-to-read measurement markings for precise ingredient additions, making it an essential accessory for your kitchen. Identify this product online using the supplier code BBL910/131'. Upgrade your blending capabilities with the Sage Blender Jug 2L today.

The reducer for the Stollar BMG570 meat grinder is a spare part that, through a gear system, provides power transmission to the meat grinders auger shaft. Designed for the Stollar BMG570 model, ensuring efficient meat grinding and a long service life for the grinder.'

his Stollar blender jug with blades is an original spare part designed for models BBL550, BBL600 and BBL605. Capacity — 1.5 litres.
If the jug is cracked, deformed or the blades rotate unevenly, it usually indicates a worn blade assembly or a damaged jug connection to the base. Replacing this spare part most often helps eliminate the described symptoms and restore the blender’s function.
Replacement can be performed at home.

Important: Before purchasing, make sure the jug matches your Stollar blender model.
Please note that the exact cause of the defect can only be determined after diagnostics at the Atar service centre.

Compatible manufacturer codes
SP0000474, BBL605/17

Suitable for Stollar, Breville blenders
Stollar BBL550, BBL600, BBL605
Breville BBL550, BBL600, BBL605

The grinder auger Stollar BMG915 guides meat directly toward the blade and ensures a steady feed flow during grinding. If the motor runs but the screw does not rotate, the cause is usually a worn or deformed drive screw for meat mincer (BMG915).
Replacing the meat grinder screw often eliminates feed interruptions and restores normal operation by removing the source of the fault.
Important: make sure that the malfunction is directly related to the meat grinder auger. The spare part can be replaced at home without completely disassembling the meat grinder.

Compatible Manufacturer Codes
BMG915

Compatible with Stollar Meat Grinder
BMG915

The stainless-steel tea basket for the Sage BTM800 kettle holds loose-leaf tea and fruit blends before brewing, and the kettle’s built-in mechanism automatically raises and lowers the basket during preparation.

The tea basket needs to be replaced if the mesh is damaged or the mechanical components are worn or missing, as this can affect the automatic lift-and-lower function.

Important: ensure the issue is related to the tea basket and not to the kettle’s lifting and lowering mechanism. This replacement can also be done at home.

Compatible manufacturer codes
BTM800/08
SP0002979

Suitable for Sage, Breville kettles
BTM800
STM800

Stollar SPP800 Metal Blade