Household equipments catalog
The juicer lid is located above the filter basket and activates a safety switch that allows the device to turn on only with a properly closed lid.
The lid must be replaced if there are visible cracks, damaged latches or other mechanical deformation that prevents the safety switch from working and prevents the juicer from turning on.
Important: if the juicer does not turn on, make sure that the problem is related to the lid safety switch and not due to a motor fault. Replacing the spare part is simple and can be done at home without contacting a service centre.
Compatible manufacturer codes:
BJE520/03, SJE520/03, SP0002322
Suitable for Sage and Breville juicers:
SJE520
BJE500
BJE510
BJE520
Stollar SHREDDER ASSY BMG750
If the grinding compartment (main tube) is broken, cracked, or snapped, it can no longer be used safely. Replace the damaged part with an original Stollar spare part designed for the BMG570 model.
The rotary grating drum for coarse grating is an original Stollar spare part designed for consistent grating of vegetables, cheese, fruits and other food products.
This replaceable cylinder is one of the meat mincer accessories (item codes: BMG570/38, BMG750/47, BMG750/49) and is mounted directly onto the main body.
When the grating drum becomes worn or mechanically damaged, replacing it helps eliminate the described symptoms and restores the food grating quality.
Replacement of the rotary drum for coarse grating can be performed without the assistance of a service centre.
Important: Before purchase, please check the compatibility of the part with your Stollar meat mincer model.
Compatible manufacturer codes
BMG570/48, BMG750/48, BMG900/48
Compatible with Stollar meat mincers:
BMG570, BMG750, BMG900
The on/off button assembly with safety microswitch and wires is a genuine spare part for Stollar SNB550 ActiveLife, SNB550S ActiveLife Sky Blue blenders.
The switch assembly is located inside the blender motor base. The power switch turns the blender on and off, while the safety microswitch allows the motor to run only if the jar with the blade unit is correctly fitted.
The switch assembly with safety microswitch is usually replaced if:
• the blender does not turn on when the power button is pressed;
• the blender cannot be turned off with the on/off button;
• the blender does not turn on even if the jar with the blade unit is correctly fitted;
• the on/off switch or safety microswitch is mechanically damaged.
If the blender does not turn on, first check that the jar with the blade unit is correctly fitted to the motor base. If the jar is not fitted correctly, the safety switch prevents the motor from starting.
Important: Before purchasing, check that your Stollar blender model is included in the list of compatible models and compare the part to be replaced with the product photo.
Compatible manufacturer part numbers:
SNB550/15
Suitable for Stollar blenders:
SNB550 ActiveLife
SNB550S ActiveLife Sky Blue
Introducing the Gear Wheel Holder Stollar BMG720, an essential component for your meat grinder. Designed for precision and durability, this gear wheel holder ensures smooth operation and optimal performance. Compatible with various models, it is crafted from high-quality materials to withstand rigorous use. The supplier code BMG720/01-2 allows for easy identification and compatibility verification online. Upgrade your meat grinder with the reliable Gear Wheel Holder Stollar BMG720 and experience seamless grinding every time. Perfect for both professional and home kitchens.
The grinding compartment (main tube) is broken, cracked, or snapped, and can no longer be used safely. Replace the damaged part with an original Stollar spare part suitable for models BMG550, BMG590, BMG600, BMG720, BMG800, and BMG850.
The auger washers and gasket form a replacement parts set for the Stollar BMG570 meat mincer. In this meat grinder, the parts are located at the end of the meat mincer screw, separate the adjoining components, reduce friction and protect the gearbox from meat juices entering it.
The washer and gasket set is usually replaced if vibration, noise or fluid leakage occurs at the end of the auger during grinding. In our service experience, these symptoms are often associated with worn seals or washers, which can increase the load on the gearbox.
Important: Before purchasing, check the model number of your Stollar BMG570 meat mincer against the list of compatible models.
Compatible manufacturer codes:
BMG570/5
BMG570/6
BMG570/7
Suitable for Stollar meat mincers:
BMG570
Stollar SPP600, Stollar SPP700
BMG450, BMG720 GEAR
The gear of the Stollar BMG420 and BMG430 meat grinder ensures the transfer of engine power to the grinding mechanism. Over time, it may wear out or become damaged, causing noise, reduced performance, or device malfunction. If you observe such symptoms, a gear replacement may be necessary.
This is the original juicing screw (extraction mechanism), designed for the Stollar BJP700 juicer.
If the screw is damaged, worn out, or juice yield decreases, replacing this part often solves the problem.
Replacement is simple and can be carried out at home.
Important: Before purchasing, make sure this part is compatible with your Stollar juicer model.
Remember that the exact defect can only be confirmed after diagnostics at a service center.
Compatible manufacturer codes
BJP750/48
Suitable for Stollar juicers
BJP700
The auger shaft washers and gasket form a replacement parts set for Stollar BMG750, BMG900 and BMG910 meat mincers. The same models may also be searched for as meat grinders. The parts in the set are located at the end of the auger, separate the adjoining components, reduce friction and protect the gearbox from meat juices entering it.
The washer set is usually replaced if vibration, noise or fluid leakage occurs at the end of the auger shaft during grinding. In our service experience, these symptoms are often associated with worn seals or washers, which can increase the load on the gearbox.
Important: Before purchasing, check the model number of your Stollar BMG meat mincer against the list of compatible models.
Compatible manufacturer codes:
BMG750/05
BMG750/06
BMG750/07
BMG750/15
BMG900/05
BMG900/06
BMG900/07
BMG900/15
BMG910/05
BMG910/06
BMG910/07
BMG910/15
Suitable for Stollar meat mincers:
BMG750
BMG900
BMG910
The actuation gear with shaft is a genuine spare part for the gearbox in Sage 800CP and Breville 800CPXL citrus juicers.
The gear is located in the juicer’s gearbox, beneath the gearbox cover. It transfers rotational motion to the juicing cone.
The drive gear with shaft is usually replaced if:
• the gear is found to be broken or otherwise mechanically damaged.
This part corresponds to item 27 in the service diagram. Do not confuse it with the gears at items 30 and 35.
Important: before purchasing, check whether your Sage or Breville citrus juicer model is included in the list of compatible models and compare the gear with shaft you are replacing with the product photo.
Before replacing the part, switch off the juicer and disconnect it from the mains power supply.
Breville spare part number SP0000042 replaces the previous part number 800CPXL/27.
Compatible manufacturer codes:
800CP/27
800CPXL/27
SP0000042
Suitable for Sage and Breville citrus juicers:
Sage
800CP
Breville
800CPXL
800CPXL
This meat grinder blade is compatible with Stollar BMG550, BMG590, BMG600, BMG720, BMG800, BMG820 and BMG850 models.
If the meat is ground unevenly or the mechanism slows down, the blade may be dull or damaged.
Replacing the blade may improve grinding quality and eliminate mechanical issues.
Blade replacement is offered as a possible solution.
Compatible codes:
BMG600/25, BMG800/1-17, BMG820/X8
Compatible models:
BMG550, BMG590, BMG600, BMG720
BMG800, BMG820, BMG850
Blender spare part, Stollar base for blender jug, jug base for blender, blender jug base, its wear or damage can significantly affect blender performance. This spare part is responsible for jug stability and often contains the blender blade mechanism, ensuring efficient mixing.
Compatible manufacturer codes:
SPP600/22, SPP700/22, SPP800/22.
Suitable for the following Stollar blenders:
SPP600, SPP700, SPP800.
The rotary coarse slices blade is an original Stollar spare part designed for consistent slicing and cutting of vegetables, cheese, fruits and other food products.
This replaceable drum coarse blade is one of the meat mincer accessories (item codes: BMG570/38, BMG750/47, BMG570/48) and is mounted directly onto the main body.
When the rotary coarse slices drum becomes worn or mechanically damaged, replacing it helps eliminate the described symptoms and restores the slicing and cutting quality.
Replacement of the rotary coarse slices blade can be performed without the assistance of a service centre.
Important: Before purchase, please check the compatibility of the part with your Stollar meat mincer model.
Compatible manufacturer codes
BMG570/49, BMG750/49, BMG900/49
Compatible with Stollar meat mincers:
BMG570, BMG750, BMG900
The meat grinder blade is a spare part for Stollar BMG420, BMG425, and BMG430 models. It is designed to replace a worn or damaged cutting edge that can no longer grind meat effectively.
If grinding becomes uneven, meat remains unprocessed, or the mechanism runs without resistance, blade replacement is usually necessary.
Replacing the blade restores proper grinding performance. The part can be replaced at home – no special tools are required.
Compatible Manufacturer Codes:
BMG430/03
Suitable for Stollar Models:
BMG420, BMG425, BMG430
Introducing the Stollar Sage S-Shaped Blade SHB700, a precision-engineered accessory designed to enhance your culinary experience. Crafted for optimal performance, this blade ensures efficient and consistent results with every use. The unique S-shaped design facilitates superior cutting, chopping, and blending, making it an essential tool for both professional chefs and home cooks. Compatible with a range of appliances, the SHB700 is built to last with durable materials that withstand frequent use. For easy identification and purchase, refer to the supplier code SHB700/L. Upgrade your kitchen toolkit with the Stollar Sage S-Shaped Blade SHB700 and experience the difference in quality and performance.
The Stollar mixing bowl lid SPP600 and SPP700 ensures safety, efficient mixing, and order in the kitchen. It protects ingredients from splattering, maintains freshness, and safeguards the device from damage.
Compatible with: Stollar the Multi Food Processor kitchen appliance Stollar SPP700
main tube
The Stollar mixing bowl lid SPP600 and SPP700 ensures safety, efficient mixing, and order in the kitchen. It protects ingredients from splattering, maintains freshness, and safeguards the device from damage.
The Stollar BMG420 and BMG430 meat grinder gearbox gear ensures the transfer of engine power to the grinding mechanism. Over time, it may wear out or become damaged, causing noise, reduced performance, or device malfunction.
The gearbox gear is a genuine spare part for Sage 800CP and Breville 800CPXL citrus juicers.
It is located under the gearbox cover and, together with the other gears, transmits the motor’s rotation to the juicing cone.
The drive gear is usually replaced if:
• the gear teeth are found to be damaged or broken.
The gear is shown as item 30 in the service diagram. Do not confuse it with the drive gear with a shaft shown as item 27 (800CP/27).
Important:
Before purchasing, check whether your Sage or Breville juicer model is included in the list of compatible models and compare the drive gear you are replacing with the product photo.
Disconnect the juicer from the mains before replacing the part.
Compatible manufacturer codes:
800CP/30
SP0000045
Suitable for Sage and Breville citrus juicers:
Sage
800CP
Breville
800CPXL
