Household equipments catalog

This is the original juice jug with lid (capacity up to 800 ml, Jug Juice Kit), designed for Sage and Breville BJE200 juicers.
If the jug is cracked, deformed or damaged, replacing it solves the problem.
Replacement is simple and can be done at home.

Important: Before purchasing, make sure this part is compatible with your Sage or Breville juicer model.

Compatible manufacturer codes
BJE200/18, SP0002297

Suitable for Sage, Breville juicers
BJE200

Replacement jug with blade assembly for Sage SBL820 and SBL920 blenders. If your blender starts working more slowly or no longer blends ingredients evenly, replacing the jug may help restore normal blending performance. This 2 litre jug supports smooth and efficient ingredient processing.

Compatible manufacturer codes
SP0025004, SBL920/04

Suitable for the following Sage, Breville blenders:
Sage 
SBL820, SBL920
Breville 
BBL820, BBL920

The citrus juicer filter, used in the Stollar SPP800 food processor, serves as the base/holder for the juice-pressing cone (part code: SPP800/27). The replacement part for the juicer SPP800 filters the drink, separating pulp and seeds from the prepared juice.

If, during pressing, the juice does not reach the container under the filter or the cone fixing point on the filter is damaged, the cause is most often a worn or deformed citrus juicer filter for the food processor.

According to ATAR service experience, in many cases replacing the juicer mesh Stollar SPP800 helps eliminate the described symptoms by removing the source of the defect.

Important: Before purchase, make sure that the citrus press accessory is compatible with your Stollar SPP800 food processor and that the defect is directly related to the citrus juicer filter. Replacing the part is simple and can be done at home without completely disassembling the food processor.

Compatible manufacturer codes
SPP800/26

Compatible with Stollar food processor:
SPP800

The blades of the Stollar Sage SPP700 and SPP800 blenders are made of stainless steel, ensuring durability and efficient mixing of ingredients. Over time, the blades may become dull, especially when processing hard ingredients frequently. This can reduce blender performance and extend blending time. Regular blade inspection and timely replacement will ensure optimal operation and longevity of your Stollar Sage blender.

SJE530 / BJE530 the Nutri Juicer™ Cold Plus juicer, top cover complete, Sage juicer lid is dishwasher safe.

The juicer lid is located above the filter basket and activates a safety switch that allows the device to turn on only with a properly closed lid.

The lid must be replaced if there are visible cracks, damaged latches or other mechanical deformation that prevents the safety switch from working and prevents the juicer from turning on.

Important: if the juicer does not turn on, make sure that the problem is related to the lid safety switch and not due to a motor fault. Replacing the spare part is simple and can be done at home without contacting a service centre.

Compatible manufacturer codes:
SJE530/02, SP0025601

Suitable for Sage and Breville juicers:
SJE530
BJE530

If your Stollar SNB550 grinding container is broken, cracked, or leaking, it can no longer be used safely. Replace the damaged grinding container (0.45 liters) with an original Stollar spare part designed for the SNB550 blender.

This is the original pressure release valve (valve steam release assembly) designed for Sage SPR680, SPR700 and Breville BPR680, BPR700 pressure cookers.

Replacement is required if steam escapes uncontrollably, if pressure is lost during cooking, or if the valve is damaged. Replacing this spare part restores proper steam control.

The replacement is simple and can be done at home.

Compatible manufacturer codes
SPR680/08, SPR700/14, SP0024055

Suitable for Sage, Breville pressure cookers
SPR680, BPR680, SPR700, BPR700

The juicer lid is located above the filter basket and activates a safety switch that allows the device to turn on only with a properly closed lid.

The lid must be replaced if there are visible cracks, damaged latches or other mechanical deformation that prevents the safety switch from working and prevents the juicer from turning on.

Important: if the juicer does not turn on, make sure that the problem is related to the lid safety switch and not due to a motor fault. Replacing the spare part is simple and can be done at home without contacting a service centre.
Stollar Top cover complete, Breville Top cover complete.

Compatible manufacturer codes:
JE70/03, JE95/03, SP0014996

Suitable for Sage, Breville juicers:
JE70, JE95, JE98

The juicer pusher is a genuine spare part for Stollar the Fruit & Veggie Juicer JES700.

The pusher fits into the 85 mm-wide feed chute. It is used to gently guide fruit and vegetables down during juicing.

The fruit pusher is typically replaced if:
• it is cracked or otherwise damaged;
• it is deformed and no longer moves freely within the feed chute;
• it is missing.

Caution: use only the pusher to guide produce into the feed chute — do not insert fingers or kitchen utensils.

Important: before purchasing, check whether your Stollar juicer model is included in the list of compatible models and compare the food pusher you are replacing with the product photo.

Suitable for Stollar juicers:
JES700

Introducing the Stollar Mixing Bowl with Handle BFP800 BAL, a must-have for every kitchen enthusiast. Designed for both amateur cooks and professional chefs, this mixing bowl combines functionality with durability. Crafted from high-quality materials, it ensures long-lasting performance and is perfect for mixing, whisking, and blending. The ergonomic handle provides a secure grip, making it easy to pour and transfer ingredients without spills. Its sleek design complements any kitchen decor, while the generous capacity accommodates a variety of recipes. For easy identification and purchase, refer to the supplier code BFP800/197'. Elevate your culinary experience with this versatile mixing bowl.

The meat grinder plate (reversible meat grinder plate) is an original Stollar spare part designed for BMG570, BMG750, and BMG900 meat grinders.
It forms a coarse mince texture suitable for preparing minced meat, sausages, and other dishes.

If the minced meat becomes too fine or the grinder operates under increased load, the plate may be worn or deformed.
This spare part replacement is a simple way to correct these issues and fully restore your meat grinder’s performance. The replacement can be carried out easily at home.

Important: Before purchasing, check that the part is compatible with your Stollar meat grinder model.

Compatible manufacturer codes
BMG750/02A, BMG570/02A

Compatible with Stollar meat grinders:
BMG570, BMG750, BMG900

Juicer filter basket is a spare part for Stollar SJE530 and BJE530 juicers.

Replacement is usually needed when more pulp remains in the juice than usual or the pulp comes out too wet. These symptoms often indicate a worn basket filter.

Important: To make sure this is the correct spare part, compare the model number on your juicer’s rating label with the compatible models listed below.

Compatible manufacturer codes:
SJE530/04, BJE530/04, SP0025603

Fits Sage Multi Cooker:
SJE530
BJE530